China Shot Peening Equipment for Sale, Model: Mrt2-80L2-4
Rotary Type Shot Peening Machine Main Function:
Shot peening is a surface treatment process that enhances the fatigue resistance and durability of components under high stress conditions. This technique introduces compressive residual stresses on the surface, which counteracts tensile stresses caused by machining, heat treatment, or other manufacturing processes. By doing so, it significantly increases the lifespan and load capacity of parts, making them more resistant to crack propagation and failure.
Rotary Type Shot Peening Machine Competitive Advantage:
1. Advanced elevator shot material recycling system with up to 15 guns recovery.
2. Compact design with efficient floor space utilization.
3. Integrated control system compliant with SAE AMS-2430 standards.
4. Peach-shaped double-tank system for continuous and uninterrupted shot peening.
5. Dust collector with secondary filtration technology, ensuring dust emission below 1mg/m³.
6. Energy-efficient design with a total power consumption of around 11.46kW.
Rotary Type Shot Peening Machine Application Industry:
This machine is widely used in various industries including wind turbines, power generation systems, mining equipment, heavy machinery, aerospace components such as landing gears and turbine blades, medical implants, and automotive parts like gear shafts, valve springs, and suspension components.
Rotary Type Shot Peening Machine Picture:
Rotary Type Shot Peening Machine Technology Data:
Rotary Type Shot Peening Machine Technology Data | |||
Model |
MRT2-80L2-4 |
||
MRT2-80L2-4E |
MRT2-80L2-4H |
||
NO. |
Technology Data |
Economical |
High Quality |
1 |
Application |
Commercial Transmission Gear/Gear Shaft |
|
2 |
Machine Size:L*W*H(mm) |
4350*5200*5100 |
|
3 |
Parts Max Diameter(mm) |
300 |
500 |
4 |
Parts Max Weight (kg) |
40 |
60 |
5 |
Parts Max Height(mm) |
450 |
|
6 |
Parts Shot Peening Position Max Height(mm) |
450 |
|
7 |
Manipulator Number |
One Axis |
Three Axes |
8 |
Spray Gun Quantity |
4 Branches/8mm Boron Carbide Nozzle |
|
9 |
Shot Peening Flow Capacity |
0-15kg/Min |
|
10 |
Shot Peening Pressure |
0-6bar (Shot Peening Pressure Closed Loop Control System) |
|
11 |
Suitable For Shot Peening |
0.2-1.6mm Steel Cut Wire Shot/Cast Steel Shot |
|
12 |
Capacity |
120 Pieces/H |
20 Sets/H |
13 |
Dust Emission |
1mg/m³ |
|
14 |
Noise (Shot Peening Pressure ≤3.5bar) |
≤78db |
|
15 |
Total Power (kw) |
11.46 |
11.46 |
16 |
Compressed Air Loss (When Shot Peening Pressure ≤5bar) |
20Nm³/Min |
16Nm³/Min |
NO. |
Configuration |
Economical |
High Quality |
1 |
Compact Design Model (Wear-Resisting Rubber Protection Within 10 mm) |
YES |
YES |
2 |
180° Main Turntable Plus Two Position |
||
3 |
Spiral Pushing Fault Alarm System |
||
4 |
Elevator Recycle Fault Alarm System |
||
5 |
Steel Shot All Filtration System |
NO |
|
6 |
Steel Shot Bypass Filtration System |
YES |
NO |
7 |
Manipulator (Three Axis) |
NO |
YES |
8 |
Manipulator (Z Axis) |
YES |
NO |
9 |
Storage Silo Alarm System |
YES |
|
10 |
80L2-4 Shot Peening Flow Capacity System |
NO |
|
11 |
80L2-4S Shot Peening Flow Capacity System |
YES |
NO |
12 |
Shot Peening Abnormal Pressure Alarm Function |
YES |
|
13 |
Shot Peening Flow Abnormal Alarm Function |
||
14 |
DC-6 Dry Dust Collector |
||
15 |
Dust Catcher Secondary Filtration |
||
16 |
Automatic Feeding Device |
||
17 |
Electric Cabinet Air Conditioning |
NO |
|
18 |
Tooling Customization |
FOR CHOOSING |
|
19 |
Almen Intensity Detector |
||
20 |
Steel Shot Detection Tool |
||
21 |
Steel Shot |
||
22 |
Roughness Instrument |
||
23 |
Ground Steel Shot Recycling Equipment |
||
24 |
Quick-Wear Parts |
||
25 |
Air Compressor + Refrigerated Air Dryer |
||
Rotary Type Shot Peening Machine Main Parts Details:
Other series Shot Peening Machine:
About Us:
Protective Mask,Full Face Visor Shield,Anti Fog Face Shield,Eye Shield Face Mask
skyshields(suzhou)thermoforming tech.co.ltd , https://www.skyshields.com