1. Dongfeng Conifer Fire Engine is designed to operate successfully at full throttle in transient conditions up to the maximum torque engine speed (speed). This is consistent with the recommended operating practices to achieve good fuel economy. At the maximum torque speed (maximum required moment speed varies from 1100 rpm to 1500 rpm in accordance with the rated engine speed), excessive accelerator pedal operation will shorten the engine life, require overhaul in advance, and cause severe Engine damage is considered an abuse of the engine.
2. When the gears are shifted, due to the different speed ratios of the gears of the gearbox, the fire engine will run below the maximum torque speed, but the time for the engine to run at full throttle under the maximum torque shall not last forever. Minutes or more.
3. Excessively high speed running of fire engines can cause severe engine damage. When a steep slope is present, the combination of transmission gear and engine or brake should be used to control vehicle and engine speed.
4. After full load operation, allow the fire truck to idle for 3 to 5 minutes before turning off the engine. This will allow the engine to cool gradually and evenly.
Good and proper use of the engine of the fire engine can guarantee superior performance. As the so-called how you treat it, it will be to you, so pay close attention to it.
Conical Co-Rotating Twin Screw Extrusion
Conical Co-Rotating Twin Screw Extruder are now widely promoted at home and abroad due to their numerous advantages.
Products are pipe, sheet, sheet, film, plastic wood extrusion and soft and hard PVC granulation, cable material granulation, color masterbatch granulation, engineering plastic modified granulation, PP, PE granulation, thermoplastic Elastomer granulation and the like.
Twin Screw Extrusion,Twin-Screw Extrusion,Plastic Wood Extrusion,Pipe Extrusion,Sheet Sheet,Film Extrusion
Zhoushan Tongfa Machinery Co.,Ltd , https://www.tongfa-machinery.com