Introduction:
This is a hydraulic cutter suction dredger, the hull of which uses assembled box-shaped structure, it is equipped with a cross sliding device, and sand suction pipe rack lift device, etc. It uses the main diesel engine in the cabin to drag the sand pump. 
The crab winch, Bridge hoisting winch, the tail positioning cylinder and water pump is drived by the auxiliary diesel engine.
 Operating environment conditions 
- Maximum ambient air temperature: 40ºC 
- Minimum ambient air temperature: -10ºC 
- Maximum cabin temperature: 50ºC 
- Maximum river (sea) water temperature: 30ºC 
- Relative humidity: not more than 70% 
Applicable navigation areas: 
Suitable for dredging operations in class A or lower class inland river navigation areas 
Suitable soil: 
River sand and sea sand in class IV and lower class areas. 


The advantages of cutter suction dredging equipment:
    The cutter suction dredging equipment is wide-range in application, it can work in rivers and lakes, and be used for dredging, channel excavationl and reclamation.
    The cutter suction dredging equipment has good economy. The excavation and transportation of materials can be completed at one time, and it is not necessary to cooperate with other equipment, so the engineering cost is lower relatively.Cutter suction dredging equipment has large production, and the pump discharge distance is far.
    The cutter suction dredging equipment has the advantages of simple operation and easy control.With the wirerope of the two side ofcutter arm frame and the anchor fixed on the two side of the channel,and depending on towing by windlass hatchback, through the swing to cutter sediment material, and work in the control of swing angle, then the twist material through the mud pipe to convey to the specified location.

The main parameters:
 

Glass Microfiber Filter Media For Air ASHRAE FILTER :F6-F9

Ashrae Fiberglass Filter Media are comprised primarily of glass microfibers and are produced with a wet laid process similar to those used for the production of paper. It's an ideal raw material to produce air filters. It's efficiency ranges from F6-F9 with low pressure drop and good strength. 

Fiberglass F9 Air Filter Paper,Fiberglass F8 Air Filter Paper,Fiberglass F7 Air Filter Paper,Fiberglass F6 Air Filter Paper,

ASHRAE :

Grade:                                               F9      F8      F7     F6

Efficiency(≥%):                                  95      90      80     60

Basic Weight (+-5g/m2) :                    70      70      70     70

Thickness (±0.02mm@100kpa ) :        0.34   0.34  0.34     0.33

Air Resistance Pa     @5.3cm/s:           88      35       33     20

Tensile Strength                                 1200  1200    1200 1200

Stiffness:                                           1200  1200    1200  1200

 ASHRAE grades (F6-F9): ordinary air-conditioning system, gas turbine air intake, air compressor, etc.

Glass Microfiber Filter Paper of ASHRAE Grade(F6-F9)

Micro Fiberglass Filter Paper,Fiberglass F8 Air Filter Paper,Ashrae Fiberglass Filter Media,F6 Glass Microfiber Filter Paper

Hebei Fangyu Trade Co., Ltd. , https://www.filtersmaterial.com