How to choose the right laser cutting machine
China Cutting Machine Trading Network provides you with all-round, deep-level, multi-angle cutting machine wholesale, cutting machine purchase, cutting machine joining, cutting machine manufacturers, cutting machine information. Details:/
From the end of each year to around the end of March in the second year, it is the equipment purchase period for apparel, bags, car decoration and other industries, that is, the traditional sewing machinery market sales season. With the increasingly fierce market competition and the continuous improvement of market demand, laser equipment such as metal laser cutting machines have been widely used.
How can I choose a suitable laser cutting machine? Below, the author analyzes this issue. The author believes that choosing a suitable metal laser cutting machine generally depends on the production of materials. In general, the following issues need to be considered:
1. Cutting slit fine: The laser cutting kerf is generally 0.10mm-0.20mm;
2. The cutting surface is smooth: the laser cutting surface has no burr method;
3. Small thermal deformation: laser processing laser slits fine, fast, and energy concentrated, so the heat transferred to the material being cut is small, causing deformation of the material is also very small;
4. Suitable for processing of large-size products: The manufacturing cost of large-size products is very high, laser processing does not require any mold manufacturing, and laser processing completely avoids the collapse of edges formed when the material is punched, which can significantly reduce the production cost of the company. Improve product quality;
5 is very suitable for the development of new products, shorten the development cycle: Once the product drawing is formed, laser processing can be carried out immediately, you can get the new product in real time in the shortest time;
6. Save materials: Laser processing adopts computer programming, which allows different shapes of products to be trimmed to maximize the utilization of materials.
Laser Cutter Operation 13 "Notes"
As a high-end processing equipment for garments, bags, automotive decoration and other industries, laser cutting machines are now used by many companies and their popularity has been increasing. However, for the operation of the laser cutting machine, if it does not pay attention, it will easily lead to frequent equipment failures, so it still needs the operator to continuously improve.
Below, based on my own practical experience, the author discusses some issues that must be known during the operation of the laser cutting machine:
1. Observe the general safety rules for laser cutting machines. We need to strictly follow the laser startup procedure to start the laser cutting machine.
2. The operator must be trained to be familiar with the structure and performance of the equipment and master operating system knowledge.
3. Wear protective clothing as required and wear protective glasses that are in compliance with the laser beam.
4. Do not process a material without knowing if it can be irradiated or heated with laser light to avoid the potential for smoke and vapor.
5. When the equipment is started, the operator must not leave the post or leave the staff to be in charge. If it is really necessary to leave, the operator should stop or cut off the power switch.
6. Keep the fire extinguisher in a position that is within easy reach; turn off the laser or shutter while not processing; do not place paper, cloth, or other flammable materials near the unprotected laser beam.
7. In the event of an abnormality in the processing, the machine should be shut down immediately, and the trouble should be promptly corrected or reported to the competent personnel.
8. Keep the laser cutting machine, the bed and the surrounding area clean, orderly, and free of oil. The workpieces, plates, and scraps are piled up as required.
9. When using gas cylinders, crush the welding wires should be avoided to avoid leakage accidents. The use and transportation of gas cylinders should comply with gas cylinder monitoring procedures. Do not expose the cylinder to sunlight or near heat sources. When opening the bottle valve, the operator must stand on the side of the bottle mouth.
10. Observe high pressure safety regulations when servicing. Follow the rules and procedures.
11. After turning on the machine, manually start the machine at low speed in X and Y direction to check if there is any abnormality.
12. After a new part program is entered, it should be tested and its operation checked.
13. When the equipment is working, we must pay attention to observing the operation of the machine tool so that the laser cutting machine does not go out of the effective range of the stroke or the two collisions cause accidents.
ã€China Cutter Trading Network provides all kinds of latest cutting machine information in real time, and free advertising space is available. Please log on to the official website for the latest information:/】
We can produce colorful Tealight Candles,the candle color can be customized.Ingredients: main ingredients paraffin heating melt into liquid and heat slightly volatile, you can smell the unique smell of paraffin wax, frozen solid when cold, absolute environmental harmlessness.Storage method: please store it in a cool, dry place.There are two layers in the Candle Set, each layer has 25 tealight, reveal itself when you open it. Also, the packing can be customized,our usual packing is 50 pcs per pack or 100 pcs per pack.
Color Tealight Candles,Unscented Colored Perfume Tealight Candles,Colored Tealight Candle With Aluminum Holder,Led Rechargeble Color Tealight Candles
Hebei Huaming Laye Limited Company , https://www.huamingcandles.com