TAIYO's market-driven electric diaphragm metering pump

T AIYO (formerly Sun Iron Works) launched a new series "ETD2" for electric diaphragm metering pumps. The electric diaphragm metering pump is characterized by no load fluctuation and stable flow. Due to the control through the inverter, the flow can be adjusted over a wide range. Mainly for the lubrication of lubricating oil, cutting oil and release materials. The new series has a maximum flow of 120L/min, which is 1.5 times that of the original series “ETD”. In addition, operating costs and CO2 emissions are reduced by approximately 80%, respectively.

The ETD2 series consists of three products with motor output powers of 0.4kW, 0.75kW and 1.50kW. The flow rate of one cycle includes 4 levels, respectively, about 0.15 L/min, about 0.16 L/min, about 0.43 L/min, and about 4.44 L/min. The materials of each model are aluminum alloy and stainless steel. The maximum discharge pressure is 0.4 MPa. It conforms to the international protection grade IP44 (wires or solids with a diameter of 1mm or more do not intrude into the interior and are not affected by water in any direction). The price is 390,000 to 866,000 yen (excluding tax).

Seal Repair kit


Cypher SPRSEALS - it starts with seals


Since 1998, in the field of mechanical seal work and control, we have made step-by-step efforts to overcome the limitations and difficulties of the factors that affect the stability of the sealing performance, such as the material and the shape of the sealing lip.
Since 2000, continuous improvement and optimization of polyurethane elastomer materials and research on mixing with different materials and chemical raw materials. While the physical properties are balanced, new material performances after different chemical mixtures are also deeply developed.

Regarding the mixing research and development of nitrile rubber, hydrogenated nitrile rubber, silicone rubber, fluorinated rubber and various metal powders, countless deployment tests have also successfully realized the ideal special sealing material.
In the development and improvement of polyamide (nylon resin), polytetrafluoroethylene, and phenolic resin, we also ushered in a rapid increase in the number of our European customers and a doubled increase in sales in the Asian market.

We are researching dust seals (DKBI), piston rod seals (IDI, IUH, HBY), support rings (KZT,), piston seals (OUH, SPGO) in conventional hydraulic sealing systems day after day ), anti-wear rings/anti-wear rings (WR, SPGW) and are suitable for all kinds of jib cylinders, cantilever cylinders, bucket cylinders, lifting cylinders, and power steering cylinders.
Including the research and development and iterative production of the sealing ring of the hydraulic breaker, there have also been more new breakthroughs.

Thank you very much for your attention. If you have any demand for sealing system solutions, please be sure to contact me. I will cooperate with you in an honest and professional manner.

+ 0086 18024069172 / 18028519773
+86 020 3201 7236
sprseals@126.com



Central Joint Oil Seal Kit for Various Models of Excavators

CATERPILLAR, HITACHI ZAXIS, SUMITOMO, KOBELCO, KOMAISU, VILVO, KATO, HYUNDAI ROBEX, DAEWOO, SANY, XCMG,


Center Joint Seal Kit


Center Joint Seal Kit


cantral joint oil seal kit for various models


Large and medium bucket oil cylinder repair kit



Travel Motor Repair Kit



Distribution Valve Repair Kit



Hydraulic Pump Repair Kit



Swing Motor Repair Kit



Pilot pump repair kit



Tensioner repair kit



Joystick Repair Kit



center repair kit








Hydraulic cylinder sealing kit, hydraulic pump maintenance sealing kit, center joint sealing kit

Safe Seal Technology Co., Ltd. , https://www.jolseals.com