The Installation Of Bearing For Conveyor Idler Roller

As the Bearing For Conveyor Idler Roller has high precision, it calls great requirements for the installation and use. If we donot pay enough attention to it, that would be a great damage to the Conveyor Idler Bearing: the lifetime may be shortened, the related components would be damaged. Generally speaking, the damage of Conveyor Idler bearing is caused by the wrong installation and use, therefore, we could increase the lifetime of the conveyor idler bearing if it is installed and used correctly.

Matters need attention:

While installing the conveyor idler bearing, the most important thing is to keep the bearing and related components clean and use proper installing tools.

1. Clean the work zone and use clean installing tools;

2. We should use assistant tools with good plasticity which donot fall off easily;

3. Confirm all the components are qualified;

4. We should break and open the seal while using it;

5. Keep the conveyor idler bearing clean during the whole installation;

6. Generally speaking, we donot need to wash off the slushing oil the conveyor idler bearing carries unless the lubrication grease is needed, we could install it as usual.

conveyor bearing press machine


A typical idler can be seen below together with an indication of the individual components :

The improved sealing arrangement protects the bearing from dust and moisture, as well as other environmental contaminants. In addition, the quality of idlers also varies depending on the quality of the individual components and of the manufacturing process.

 Conveyor Idler

Conveyor Idler Components

Idler roller

Conveyor idler Roller Structure

Idler roller consist of idler roller shell, shaft, bearing, bearing house, seals and axial clip etc.

1. Tube or shell. The Shells are made from steel tube with close tolerance ensuring smooth, Shock free and eccentricity free running with minimum dimensional run out, smallest rotating weight of rollers requires low horse power, thereby conserving power and energy due to lowest possible dynamic friction.

 

2. Seals should be multi labyrinth  type to prevent ingress of dirt, air and moisture. The outer seal should be corrosion resistant.

 

3. Bearing housing are formed from strip steel deep pressed in automatic presses machine, this tolerance allowing a perfect match between the bearing and the relevant parts of the sealing.

 

4.Bearing. Large clearance C3/C4 serials deep groove ball bearings, reinforced cage with big rivet, thick inner ring and outer ring. usually use double sealed structure to improve the water and dust proof ability.

 

5. SHAFT: Shaft is formed from cold drawn round bar and calibrated to ISO to ensure precise assembling of bearing.

 

 

Main Ball Bearing for Conveyor Idler Roller:

Series 60.., 62.., 63..,  Open/ ZZ/2RS..

6200 Series - Light Series Ball Bearings â€“ Balanced between space and load capacity

6300 Series - Medium Series Ball Bearings â€“ Ideal for heavier load capacity applications

Conveyor Idler Components1

To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and conveyor idler manufacturers contact from all over the world, and become our partner.

 

Conveyor Idler Components

Idler Roller Components,Idler Roller Accessories,Conveyor Idler Components,Conveyor Roller Components

Shandong Xinkaite Bearing Co., Ltd. , http://www.conveyorbearing.com