China's grain production has contributed to the eight consecutive increase of agricultural machinery and equipment

In 2011, China’s grain production achieved eight consecutive increases, and the State Council awarded 300 large-scale tractors to each of the nation’s large grain producers at the “National Food Production Awards and Awards Conference”, reflecting the country's affirmation of domestically advanced agricultural equipment to boost agricultural output. And expectation.

On the afternoon of December 26, 2011, at the Beijing Railway Building where representatives of the “National Food Production Advanced Recognition Conference” stayed, a Taitung Red Horse Power Tractor dressed up here with joy. This was a “reward for the State Department to reward the country’s large grain producers”. car". Delegates visited the prize cars and the “China One to China Modernization of Agriculture” picture exhibition held here.

There is no panic in the hands of the grain. In 2011, China’s grain output reached 570 billion kilograms, and achieved “eight consecutive increase”. The harvest of grain has played a very important role in China's response to the challenges of international economic turmoil and in effectively curbing prices to curb inflation. Behind the continuous increase in grain production is the continuous improvement of the level of China's agricultural mechanization and the continuous improvement of the level of agricultural machinery manufacturing.

Arming Chinese farmers with advanced equipment Since 2003, China has begun to award tractors to large grain producers across the country. In 2011, rewards differed from previous years. In previous years, 300 “grain-producing pacesetters” were selected from 300 large grain producers declared throughout the country to reward them. In 2010, 30 were awarded, and in 2011, 300 large grain producers were all rewarded.

According to the person in charge of the Ministry of Agriculture, the Ministry of Agriculture began rewarding large-horsepower tractors for grain production in 2003. This measure is intended to mobilize the enthusiasm of farmers for grain production. On the other hand, it also promotes high-horse tractors to farmers and guides farmers to actively use modern technologies. Arm yourself.

With the continuous advancement of China's large-scale agricultural operations, farmers increasingly need advanced large-horsepower tractors. However, in the past, domestic high-horsepower tractors and imported products have a wide gap in all aspects. In recent years, driven by the national policy, China's agricultural machinery industry has made considerable progress. China's agricultural equipment manufacturing enterprises represented by China's One Tide have continuously increased their investment in science and technology, and their manufacturing capabilities and product technology levels have made major breakthroughs.

It is understood that the Eastern Red Wheeled Tug is the only successful project in the introduction of tractors from Europe and America at the beginning of China's reform and opening up. At that time, the rural areas had just “distributed land to households” and farmers’ purchasing power was very limited. As soon as China focused on the future direction of development, the imported Italian Fiat tractor manufacturing technology was digested, absorbed, and reinvented to form a series of products adapted to China’s national conditions. China's wheeled tractor's technology platform, and formed a large wheel drag with Dongfanghong Diesel Engine, gearbox, axle, crankshaft, and cover as the key elements of the "Golden Supply Chain". ". Not only did Dongfang Hongda's round-trip sales maintain its number one position for many years in a row, but key components such as Dongfang Hong Diesel Engine and Dongfang Hong Qian Ma Bridge also maintained a matching share of more than 60% in the industry for a long time.

After many years of accumulation, China has had a completely independent intellectual property rights in the field of high-powered tractors, which allows Dongfanghong Tractor to participate in international competition and compete with transnational giants. After Dongfanghong 1804 Tractor was gradually matured and put on the market in 2008, it immediately lowered the price of the power segment by one-third, plus the advantage of local service, and “Oriental Red” quickly became the market for this power segment. The main product.

Leading the industry with advanced technology transformation At the end of November 2011, after the country’s award program for large grain producers was finalized, relevant departments began to openly bid for this 300 “prize car”. As soon as the news came out, many domestic tractor manufacturers, including China One, Shanghai New Holland, Tianduo Deer, Foton Lovol and Changzhou Dongfeng, actively participated in bidding.

“The brands that can participate in bidding are good reputations in the market for many years, and they are sure that the pressure on many competitors is not small, but China’s drag on the technology advantages accumulated over the years, combined with the strength displayed in the market over the years, ultimately Won a bid." China has delayed the relevant person.

According to industry sources, it is no accident that Dongfanghong Tractor won this bid. The huge brand effect of Oriental Red Products in the market is not only due to the fact that China has been the “first son of the Republican Agricultural Machinery Industry”, but also that it has persisted in digesting, absorbing, and re-innovating advanced technologies for many years, thus forming the company’s core competitiveness.

In recent years, with the gradual increase of farmers' income, the demand for high-end tractors has become increasingly urgent in the market. “The tractor is too hard to work on, and the physical requirements of the driver are particularly high and the work is particularly tiring.” A machine operator from Henan said that when driving high-powered tractors and supporting equipment, they must complete steering, shifting, and adjustment of the units at the same time. Machines and other operations, the operation is difficult, the quality of the job is difficult to guarantee. It is easy to leave dead corners when performing complex tasks, and requires repeated work, which is neither economical nor effortless.

In 2007, China began to integrate global technology resources to implement the "PST project" and develop a new type of power shift tractor with independent intellectual property rights. In September 2010, Dongfanghong Powershift Tractor, known as "China's most advanced tractor," was born in China, marking the initial formation of a new generation of high-power wheeled tractor technology platform in China.

The successful launch of this product has not only broken the monopoly of the international agricultural giants in this field, but also established a technical platform for the upgrading of our tractors.

China's introduction of Fiat technology formed a large wheel drag technology platform, from technology introduction to investment into the market for more than 20 years. The Dongfang Hong power shift tractor has only been used for 5 years from the start of R&D to the market.

From 20 years to 5 years, behind this figure, it is China's constant acceleration of technological upgrading; behind the technological upgrade, China's strategy is to implement an international vision.

At present, China is leading a new round of transformation and upgrading of China's agricultural machinery manufacturing industry.

The development speed and growth potential of China's agricultural mechanization with an international perspective layout of the industrial chain has made the Chinese market particularly concerned by the global agricultural giants. In recent years, many foreign agricultural machinery manufacturers have set up factories in China, and China has become an arena for global agricultural machinery giants.

However, it is inconsistent with this that, for a long time, China's agricultural machinery manufacturing industry has faltered in the low-end fields. The homogenization competition among enterprises has become increasingly fierce, and the traditional product development model has encountered severe challenges.

In 2006, China began to accelerate the implementation of its internationalization strategy and viewed the company's sustainable development and international operation from a global perspective.

In 2007, China began to cooperate with foreign advanced R&D institutions to develop power-shifted tractors with advanced intellectual property rights and advanced intellectual property rights. Today, China has not only mastered the 200-horsepower power shift technology, but also began to put into trial production the 300-horsepower power-shift tractor. In 2008, China delayed the commissioning of assembly plants in countries such as Kyrgyzstan, marking the beginning of China’s technical export to overseas. This year, China has completed its global marketing deployment and its sales network has covered the world.

While integrating global technology and marketing resources, China has also begun to integrate manufacturing resources globally.

In the spring of 2011, China Toto successfully acquired the McMCormick plant in France, which is part of the Italian ARGO Group, and changed its name to YTO (French) Agricultural Equipment Co., Ltd. This is the first case of Chinese agricultural machinery companies acquiring world-class agricultural machinery companies after the founding of New China.

With the accelerating pace of domestic and foreign market integration, in 2011, China has also embarked on a strategic adjustment of its market layout so that all aspects of production, sales, services, etc., extend to the terminal market as much as possible.

At the headquarters in Luoyang, China has built a state-of-the-art tractor production base in China, applying a large number of new processes and technologies such as robotic spraying, on-line inspection, quantitative and vacuum filling, which not only enables domestic product quality control, but also assembly technology, Manufacturing technology has reached the leading domestic industry. In Qiqihar in the northeast China, the modern agricultural base in Heilongjiang was built and put into operation, and the products radiated to markets in Northeast and Northeast Asia. In Urumqi, in the northwest, China's modern production base in Xinjiang was put into operation in 2010, not only satisfying the needs of users in the northwest, but also radiating markets such as Central Asia.

Technological progress has guided industrial upgrading, and the development of the agricultural machinery industry has provided equipment support for modern agriculture and provided support for the sustained and healthy development of the national economy. In 2011, breakthroughs were made in R & D projects such as Dongfanghong LF2204/LF1504 tractor, Dongfanghong LA3004 tractor, 6K series diesel engine and electronic control unit pump. However, how to give full play to its advantages in the future, continue to innovate, and continue to develop, so that China-made agricultural machinery can better serve China and the world. China's agricultural equipment manufacturing companies represented by China One Trailer still have a long way to go.