China Top Grade Quality DC Solar Water Pump Price (5 Years Warranty)
Solar panels are used to convert sunlight into electrical energy which will be passed to the solar pump controller. The energy will be used to power the pump. Solar Controller/Inverter is used to stabilize the power voltage and output the power to drive the electric motor of the pump. If backup batteries (optional) are available, then the pump controller can charge them. Battery is for storing the additional energy that can be used at a later time when the sunlight may not be adequate to drive the pump. Water Level Detector/Sensors is used to connect to the controller and can be used to protect the pump from running dry as well as to automatically turn the pump off when a water tank is full.
SPECIFICATION
1. Max Head : 20 -- 320m;
2. Max Flow : 0.76 -- 200 m3/hr;
3. Power : 0.1hp -- 100hp;
4. Voltage : 12 V - 120V; 220V - 540V
5. Motor : DC motor & AC motor;
6. Material : SS304 & SS316 ;
7. Controller : MPPT type for Automatic Restart;
APPLICATION
1. Irrigation of agriculture
2. Drinking water and living water
3. Garden irrigation
4. Fountains
FEATURES
1. Efficiency improved by 25% using permanent magnet, direct current, brushless, non-sensor motor.
2. Double plastic packaging for rotor and stator, motor insulation ≥300MΩ, significantly improving motor safety.
3. High-tech products using MPPT and DSP chip technology.
4. 100% copper wire, cold-rolled silicon steel sheet.
5. Stainless steel 304 & 316 shaft, motor body, screw.
NEW DEVELOPED SOLAR PUMP
1. Restart: Totally automatic restart every morning or when the sun appears after clouds.
2. Efficiency: 15-20% higher than common controllers.
3. Protection Against Wrong Connection: Can protect against being burned in case customers reverse panel "+" and "-" terminals when connecting to the controller.
4. High Temperature Resistance: Can run well under 50 degrees condition for 24 hours continuous working.
3' Submersible Solar Pump (Screw Pump)
| Model | Voltage (V) | Power (Kw) | Max. Flow   (M³/H) | Max. Head (m) |
Outlet (Inch) | Diameter* Length (mm) | Weight (Kg) |
| 3SPS0.72/20-D12/80 | 12--26 | 45-150 | 0.72 | 20 | G0.75" | Â | 6.5 |
| 3SPS0.76/28-D12/120 | 12--26 | 120 | 0.76 | 28 | G0.75" | Â | 6.7 |
| 3SPS0.86/38-D12/150 | 12--26 | 150 | 0.86 | 38 | G0.75" | Â | 6.8 |
| 3SPS1.0/30-D24/80 | 16-36 | 45-150 | 1 | 30 | G0.75" | 76*400 | 7 |
| 3SPS1.3/50-D24/140 | 16-36 | 80-200 | 1.3 | 50 | G0.75" | Â | 7.2 |
| 3SPS1.8/80-D24/210 | 16-36 | 100-270 | 1.8 | 80 | G0.75" | Â | 7.5 |
| 3SPS1.8/100-D36/270 | 24-48 | 140-350 | 1.8 | 100 | G0.75" | Â | 8 |
| 3SPS1.8/120-D36/500 | 24-48 | 320-800 | 1.8 | 120 | G0.75" | Â | 9 |
| 3SPS2.3/140-D48/750 | 36-72 | 480-950 | 2.3 | 140 | G0.75" | 76*460 | 9 |
| 3SPS2.3/160-D72/1000 | 48-96 | 600-1200 | 2.3 | 160 | G0.75" | Â | 9.5 |
| 3SPS2.3/180-D72/1300 | 72-144 | 800-1500 | 2.3 | 180 | G0.75" | Â | 9.5 |
4' Submersible Solar Pump (Centrifugal Pump)
| Model | Voltage(V) | Power(W) | Max. Flow  (M³/H) | Max. Head   (m) | Outlet (Inch) | Diameter* Length(mm) | Weight (Kg) |
| 4SPSC5.0/28-D24/250 | 18-26 | 120-360 | 5 | 28 | G1.25" | 100*540 | 12 |
| 4SPSC5.5/38-D36/400 | 24-48 | 200-500 | 5.5 | 38 | G1.25" | 100*650 | 12.5 |
| 4SPSC5.5/58-D48/750 | 36-72 | 450-900 | 5.5 | 58 | G1.25" | 100*680 | 13.5 |
| 4SPSc6.0/72-D72/1000 | 48-96 | 600-1200 | 6 | 72 | G1.25" | 100*740 | 15.5 |
| 4SPSc6.5/98-D72/1300 | 72-144 | 800-1500 | 6.5 | 98 | G1.25" | 100*880 | 16.5 |
| 4SPSC10/30-D48/750 | 36-72 | 450-900 | 10 | 30 | G1.5" | 100*540 | 13.5 |
| 4SPSC10/44-D72/1000 | 48-96 | 600-1200 | 10 | 44 | G1.5" | 100*650 | 15 |
| 4SPSC10/57-D72/1300 | 72-144 | 800-1500 | 10 | 57 | G1.5" | 100*680 | 15.5 |
| 4SPSC15/21-D72/1000 | 48-96 | 600-1200 | 15 | 21 | G2" | 100*540 | 13.5 |
| 4SPSC15/28-D72/1300 | 72-144 | 800-1500 | 15 | 28 | G2" | 100*620 | 14 |
6' Submersible Solar Pump (Centrifugal Pump)
| Model | Impeller Material | Voltage (V) | Power (KW) | Max. Flow   (M³/H) | Max. Head   (m) | Outlet (Inch) | Diameter* Length (mm) | Weight (Kg) |
| 6SPSC23/21-D72/1300 | Stainless Steel 304 | 72-144 | 800-1500 | 23 | 21 | G3" | 125*700 | 23 |
| 6SPSC28/13-D72/1300 | 72-144 | 800-1500 | 28 | 13 | G3" | 125*710 | 24 | |
| 6SPSC46/7-D72/1300 | 72-144 | 800-1500 | 46 | 7 | G4" | 125*690 | 22 |
NEW SOLAR PUMP CONTROLLER SPECIFCATION
| ITEM | Controller Voltage | Best Working Voltage (vmp range) | Max limited Voltage (max.Voc) |
| New mppt Controller | 24V | 17-40V | 50V |
| 36V | 23-50V | 68V | |
| 48V | 32-63V | 78V | |
| 72V | 48-96V | 120V |
NEW MPPT SOLAR PUMP ADVANTAGE :
| Â | New MPPT Controller | Â | Poor Quality Controller on Market |
| Restart | Totally Automatically restart every morning, or when the sun appears after cloud | V.S . | Not steady, and cannot restart automatically |
| Efficiency | 15-20% higher than common Controller | V.S . | Lower efficiency |
| MPPT Function | Has MPPT function | V.S . | No MPPT |
| Input Voltage Range | Increase much larger input voltage range to 150V. Will make the panel selection very easy, also avoid too higher input voltage burn the controller | V.S . | Very smaller input voltage range largest only to 85V, and will be burnt if the panel voltage increases during the very shinning daytime; |
| Protection Against Wrong Connection | Can protect against being burned, in case some customers reversed panel "+" and "-" terminals when connection to controller; | V.S . | No Protection, will be Burned Definitely |
| High Temperature Resistance | Can run well under 50 degrees condition for 24 hours continually; | V.S . | Will be burned, if temperature more than 40 degrees; |
| Operation | Very Convenient to Open the Box to change the SPEED SWITCH; | V.S . | Not Convenient, needs Screwdriver to open the 4 bolts every time; |
| Warranty | 3 Years | V.S . | No warranty or longest as 1 year; |
Extrusion aluminum enclosures are a type of enclosure that is made using extruded aluminum profiles. These enclosures are typically used to house electronic equipment, such as circuit boards, power supplies, and other components.One of the main advantages of extrusion aluminum enclosures is their durability. Aluminum is a strong and lightweight material that can withstand a wide range of environmental conditions, making it ideal for use in harsh industrial or outdoor environments.Extrusion aluminum enclosures are also highly customizable. The extruded aluminum profiles can be cut to any length and shaped to accommodate a wide range of components and configurations. Additionally, the enclosures can be painted or anodized to match specific color requirements.Another advantage of extrusion aluminum enclosures is their ease of assembly. The extruded profiles typically include pre-drilled holes and slots for mounting components and hardware, making it easy to assemble and disassemble the enclosure as needed.Overall, extrusion aluminum enclosures are a versatile and durable choice for housing electronic equipment in a wide range of applications.
Extrusion Aluminum Enclosure,Aluminum Extrusion Enclosure,Extruded Aluminum Box,Extruded Aluminum Case
Suzhou Remgar Metal Manufacturer Co.,Ltd. , https://www.remgaral.com