Factory Sell Waste Tyre Sidewall Cutting Machine for Tyre Recycle

Used Tyre Cutting Machine is a Type of Tyre Recycling Equipment for Rubber Powder Production Line

 

 

Market Development Potential:

 

 

 

The method of recycling waste tyres involves separating the inner steel wire and fiber from used tyres through various technologies and grinding the rubber granules into powder. Waste tyre treatment equipment are suitable for international development and management styles. The biggest advantage is that it can recover waste tyres into rubber granules/powder, achieving 100% utilization.

 

Rubber powder is widely used across almost all industrial fields. It can replace materials such as plastic and PVC, substitute natural rubber, and be reborn into tires. It is used in sports runways and shoe soles, as well as in highways, air travel, and third-generation railway sleepers as modified asphalt.

 

Process:

 

Waste tyres -- Single wire drawing machine -- Rubber cutter machine -- Whole tyre cutting into large blocks (four or two pieces) -- Rubber crusher mill machine (30mm-50mm) -- Into powder (10-28 mesh) -- Magnetic separator for thin steel removal -- Fiber separator for rubber removal -- Packing

 

 

 

Rubber Powder Applications:

 

1. Paving Sports Grounds:

 

Runway, school sporting field, garden path, bowling alley, pavement, recreation field, basketball field, etc.

 

1. Automobile Industry

 

Train's floor, disc silk ribbon for braking, soleplate of automobile and truck, shake sleeve, seal stripe, buffer, shock absorber, daily material for ocean shipping, tyres and inner underlay of tyres, etc.

 

1. Architecture and Equipment:

 

Adhesive/sealant, floors of hospital, company, insulated rubber material, carpet cushion, grass cushion for family animal, extruded products, module products, coating, bricks, thin slice, waterproof material, etc.

 

1. Application in Geotechnical/Asphalt

 

Drainage pipe, asphalt modified by rubber powder which can be used to construct highways and driving ways, filter, adjusting soil/coating layer for road surface, washing pipe with holes, runway for horse race, barrier for traffic or pavement, etc.

 

1. Regenerative Rubber

 

Rubber products manufacturing.

 

1. Other Applications

 

Making coatings, paint, activated carbon, etc.

 

 

 

 

 

1. Ring Cutter
 

This machine is mainly used to cut the sidewall of steel wire tires, and then proceed to the next step of segmentation. First, place the tire on the platform, then rotate the hand wheel, and the three claws will firmly grip the inner tire. Second, start the power. The work platform will rotate, and the cutting tool will slowly and step by step cut the tire until the side is removed. 

Cutter

 

Strip cutting machine can cut cycle machine to remove the wire tire sidewall into strips, and the width of the adjustable section. Two circular knives for special materials, hard and durable, can be used repeatedly for no more than 1200 steel tires.

 

3. Block Cutter

 

Block cutter is designed to cut car, truck, and rear tractor tires. The range is up to 120cm for truck tires. The tire cutter adds flexibility to your total tire cutting system by allowing you to accept tires up to 120cm into your system. The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.

4. Bead Wire Separation

 

 Used to separate rubber and steel wire of bead to get whole steel wire.

 

Feature: Easy operation, easy to install and maintain, high efficiency, and clean.

 

 

 

 

 

5. Tyre Crusher

 

This machine is mainly used to crush waste tires and rubber. The structure is gear transmission


 

100% Real Manufacturer,  

 

Welcome to visit our factory and we can show you the machine in working condition:

 

If our products win your interest, please send us inquiries with detailed requirements and we will provide detailed information to you. We can also make machines according to your request.  

Silicone Roller

Rubber rollers are used because rubber has an elasticity that no metal can provide. Metal can corrode, scratch, dent and crack, which can happen easily and often. Additionally, the texture and hardness of metals can scratch and damage any medium they come into contact with. Other materials, such as fiber-reinforced composites, can offer better quality, but are more expensive and less readily available. They are not readily available and are usually more expensive. Rubber pulleys are the most economical method while offering longer pulley life and unique physical and psychomechanical properties

Silicone Roller,Acid Resistance Roll,Textile Printing Roller,Wear Resistance Roll

Taixing Jinlong Rubber Rollers Co., Ltd. , https://www.jinlongroller.com