Warranty:
3 years for motor and controller. Solar panel 20 years (optional).
Installation:
1. Wiring the pump
Connect a longer cable to the pump (cable size must be at least 1.5mm²). Use the parts contained in the cable connector kit (heat-shrink tube and tape) to connect a longer supply wire to the pump. If you don't have a heat gun, the barrel of your soldering iron will work or you can use a butane torch with caution to avoid melting the insulation or causing a fire. Bare the insulation back as shown.
A. Lay out the components needed to make the joint
B. Place the large diameter heat-shrink over the main cable and then the smaller diameter pieces over the individual wires. Keep the heat-shrink away from the joints while soldering. Heat transfer can cause premature shrinking.
C. Slide the small heat-shrink over the soldered joints and heat using a heat gun or alternative heat source to shrink it down over the wires.
D. Wrap the tape over the sealed joints.
E. Finally slide the large diameter heat-shrink over the completed joint and shrink it to seal.
Place the pump in water before wiring the controller box. This allows the pump to go through the pre-conditioning process. Do not place the pump in its final position until it has been tested, unless it's easy to access and remove.
Solar Pump Control Box Features:
A. Low-voltage protection (automatic)
B. Over-current protection (automatic)
C. Protection for low water level in well (AB sensor)
D. Protection for full water level in tank (LH sensor)
E. Motor speed control (speed regulator)
F. Delay working when the tank is full (a timer inside delays operation for 30 seconds when the tank is not full)
G. MPPT function (Maximum Power Point Tracking)
H. Optional battery (can be used with a solar charger battery system)
[Image: Solar Bore Water Pump Price, Solar Powered Borehole Water Pump Price 1HP 1.5HP]
[Image: Solar Bore Water Pump Price, Solar Powered Borehole Water Pump Price 1HP 1.5HP]
[Image: Solar Bore Water Pump Price, Solar Powered Borehole Water Pump Price 1HP 1.5HP]
[Image: Solar Bore Water Pump Price, Solar Powered Borehole Water Pump Price 1HP 1.5HP]
This solar-powered submersible pump is ideal for wells and clean water applications. It uses DC technology and magnetic startup, ensuring efficient and reliable performance. The pump is designed for durability, with a powerful motor and advanced control features that enhance its efficiency and lifespan.
The product comes with a plywood packaging, making it safe for transportation. Its HS code is 8413709190, and it is manufactured in China under the brand "Mr. Pumpboy." With a specification of 87x32x13, this pump is suitable for various environments where solar energy is available.
Whether you're looking for a solution for rural water supply, irrigation, or residential use, this solar water pump offers a sustainable and cost-effective option. It’s also compatible with optional battery systems, allowing for continuous operation even during low sunlight hours.
With its comprehensive warranty and built-in safety features, this pump ensures long-term reliability and minimal maintenance. It’s a great investment for those seeking an eco-friendly and efficient water pumping solution.
Nitrate
Nitrate Hexahydrate,Strontium Nitrate,Nitrate High Purity,Aluminum Nitrate Nonahydrate
Vietnam Fine Chemical Factory , https://www.finechemvina.com