Warranty:
3 Years for motor and controller. Solar panel 20 years (optional).
Installation Instructions:
1. Wiring the Pump
Connect a longer cable to the pump (the cable size must be at least 1.5mm²). Use the parts included in the cable connector kit (heat-shrink tube and tape) to connect a longer supply wire to the pump. If you don’t have a heat gun, the barrel of your soldering iron can work, or you can use a butane torch with caution to avoid melting the insulation or starting a fire. Make sure to strip the insulation back as shown in the diagram.
A. Lay out all the components needed for the connection.
B. Place the large diameter heat-shrink over the main cable, then the smaller diameter pieces over the individual wires. Keep the heat-shrink away from the joints while soldering to prevent premature shrinking.
C. Slide the small heat-shrink over the soldered joints and heat it using a heat gun or alternative heat source until it shrinks tightly around the wires.
D. Wrap the tape over the sealed joints for additional protection.
E. Finally, slide the large diameter heat-shrink over the completed joint and shrink it to ensure a secure connection.
Before wiring the controller box, place the pump in water to allow it to go through the necessary pre-conditioning. Do not install the pump in its final position until it has been tested, unless it is easily accessible and removable.
Solar Pump Control Box Features:
A. Low-voltage protection (automatic)
B. Over-current protection (automatic)
C. Protection for low water level in the well (AB sensor)
D. Protection for full water level in the tank (LH sensor)
E. Motor speed control (speed regulator)
F. Delay working when the tank is full (a timer inside delays operation for 30 seconds when the tank is not full)
G. MPPT function (Maximum Power Point Tracking)
H. Battery optional (can be used with a solar charger battery system)
[Image: Solar Bore Water Pump Price, Solar Powered Borehole Water Pump Price 1HP 1.5HP]
[Image: Solar Bore Water Pump Price, Solar Powered Borehole Water Pump Price 1HP 1.5HP]
[Image: Solar Bore Water Pump Price, Solar Powered Borehole Water Pump Price 1HP 1.5HP]
[Image: Solar Bore Water Pump Price, Solar Powered Borehole Water Pump Price 1HP 1.5HP]
This solar-powered submersible pump is ideal for well applications, offering efficient performance with solar energy. It is designed for clean water and features a DC pump system with powerful output. The product comes with a 3-year warranty on the motor and controller, and an optional 20-year warranty on the solar panel. The unit is packed in a wooden case for safe transport.
The pump is equipped with advanced technology such as MPPT, which optimizes energy usage from the solar panels. It also includes safety features like low-voltage and over-current protection, making it reliable and durable for long-term use. Whether you're looking for a solution for rural water supply or agricultural irrigation, this solar pump is a smart and eco-friendly choice.
P-Nitrobenzoic Acid
P-Nitrobenzoic Acid Acidity,P-Nitrobenzoic Acid From Benzene,P-Nitrobenzoic Acid Boiling Point,P-Nitrobenzoic Acid Solubility
Vietnam Fine Chemical Factory , https://www.finechemvina.com