There are many brands of clothing anti-theft devices, which are satisfied with the different needs of different clothing manufacturers. Some people tend to be beautiful in clothing anti-theft devices, and some tend to be stable and reliable in clothing anti-theft devices, while others tend to be warning of clothing anti-theft devices. In fact, when faced with beautiful clothes, especially those with high prices, many people will be tempted, but in order to eliminate their evil thoughts, it is necessary to install a clothing alarm. So what characteristics should the clothing alarm have to meet the needs of the business?
1, clothing anti-theft device, model models complete.
Each clothing manufacturer sells different types of clothing, different materials, fabrics, and details so that the clothing store is different, and it is required to install different types of clothing alarms. There are many kinds of clothing anti-theft devices, such as different sizes, different colors, different shapes, etc., which will meet the needs of different clothing manufacturers. At present, the anti-theft device of Jinshi Weida anti-theft is relatively complete.
2, clothing anti-theft device, the color size is different.
There are many brands of clothes in each season, the new color is more consistent, so if you want to install clothing anti-theft device, you must also choose the color matching is not so awkward, otherwise it will inevitably lower the level of clothing, affecting the normal inside the store sell. There are also some clothing materials that are relatively soft. If the device is too large and the weight of the clothing is too large, it will bring a certain amount of wear to the clothes, which will affect the display effect of the clothes.
There are many characteristics of the clothing anti-theft system. The basics are stability, beauty and moderate size, so that more clothing manufacturers can satisfy. Therefore, to buy clothing anti-theft devices, we must choose Beijing Jinshi Weida Co., Ltd., not only the full range, but also inexpensive.
Working Principle
Chenwei Series Vibration Polishing Machine has a ring chamber to hold media (abrasive stones) and work pieces.When the machine start working,it makes three-D high frequency vibration.This motion makes the media work on surface of work pieces upward &downward;leftward and rightward;frontward and backward.The process is similar to handwork of surface polishing.
The grinding stones are rolling forward and they are grinding each other during .this makes the work pieces ,polished and clean.
To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.
The machine structure
Vibratory Polish machine is composed of inertial vibrator, vessel, electrical cabinet and basement.
Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.
Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable Polyurethane, to weaken the noise and the bump of workpieces on vessel. (For CWP series, there is a separator on the vessel to seperate the workpieces from the stones. )
Electrical cabinet: Operate the machine by buttons on the control panel.
Basement: It is weld of steel, and it has springs to hold the vessel
Polishing Machine
Polishing Machine,Car Polishing Machine,Wheel or Polishing Machine,Car Alloy Wheel
XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.cwsieve.com