CPU isolation terminal will become the industry mainstream

At present, with the development of science and technology, the design of isolated terminals is becoming increasingly smaller, and the purpose of miniaturization is to occupy less space. Of course, users should be allowed to install intensively. If there is a thermal problem in dense installations, internal power consumption must be reduced. Therefore, the value of the internal power consumption should also be taken into consideration when selecting it.

The relevant person of Jinhu Mingtong believes that there are many isolated terminals with CPU as the core in the market, which has onsite compiling and communication functions and high flexibility. It can reduce the inventory quantity and reduce the capital backlog for customers.

The CPU-based isolation terminal will become the mainstream in this field.

There is another way to isolate the transmitter. The sensor and transmitter must be in one place and must be placed in a designated location on the site. Isolating terminals are generally placed in a central control room cabinet. Isolating terminals in the cabinet are used to distribute power to field transmitters. Which one to use depends on the PLC interface.

On-site commissioning may result in mismatch between the instrument and the PLC interface. The sending device is a 4-wire transmitter output of 4 to 20 mA, and the 4 to 20 mA interface on the receiving side is a two-wire loop power supply. If the direct connection is used, power conflicts will occur.

Rendering Processing Equipment

CONNECT main rendering processing equipment including the batch cooker, dryer, CONNECT SUPPER cooker & dryer, fat press, oil processing equipment.

Batch Cooker
Basic structure and working principle
The Connect Batch cooker is the latest developed new type of hydrolysis tank, it combines normal temperature hydrolysis, high temperature sterilization, rapid drying in one.
The structure including jacketed shell, hollow rotor, dual head,sealing sea, feed in and out, power unit and other components. Raw material which including feather, animal fur, dead birds, animal carcasses, etc. feed through the inlet, it minced by rotator and hydrolysis by normal temperature, and then sealed to raise the temperature up to 12 00 ℃ to sterilize. At the same time breaking down the feather keratin molecule chain for increasing its protein absorption rate. According to the requirements of the new products to grasp pressure and time to discharge steam into drying stage. The fast drying is proceed by shell where filled with steam or high temperature thermal oil in jacket and hollow rotor.

Waste Rendering Plant
Our Rendering Plant For Poultry to cook and sterilize the waste, and sophisticated barometric sprays to scrub all the foul smelling gases emanating during the cooking of the bird waste. Poultry waste rendering plants are indispensable in any Poultry dressing operation. They render and convert all the non-edible Poultry waste parts into a sterilized meat meal.

Our digestor based technology has been put to treat 3 different kinds of waste -

1. Hatchery waste - egg shells, unhatched eggs, rejected embryos, etc. This waste is converted into Hatchery meal.

2. Layer Manure - Manure collected under the cages of layer birds in commercial poultry layer farms. This waste is converted into an organic fertilizer.

3. Slaughterhouse waste - Left over, non-edible portions of the chicken such as Head, feet, intestines, feathers, etc. from chicken processing. This waste is converted into a Meat and Bone meal.

Rendering Processing Equipment, Rendering Batch Cooker, Protein Rendering Cooker, Feature Meal Cooker, Chicken Meal Cooker,Hydrolysis Tank,Waste Rendering Plant

Connect Group For Poultry Project , https://www.connectpoultry.com