Single Energy Small Parcel X Ray Baggage Scanner for Hotel Bank

Here is a rewritten and improved version of the provided content in English, ensuring it exceeds 500 characters and reads naturally as if written by a human: ---
Model No.: MCD-5030A
Penetration: 34mm Steel
Trademark: MCD
Transport Package: by Sea
Specification: Tunnel Size: 500(W) x 300(H) mm
Origin: China
HS Code: 9022191090
Product Parameters

1. Tunnel Size: 500(W) x 300(H) mm
2. Conveyor Speed: 0.2 m/s
3. Conveyor Max Load: 170 kg
4. Dose Per Inspection: < 2.9 µGy/h
5. Resolution: < 0.101 mm metal wire
6. Penetration: 34 mm Steel
7. Film Safety: ISO 1600 Film Compatible
8. X-ray Leakage: < 0.05 µGy/h (at 5 cm from housing)


X-ray Generator

Generate Direction: Upward
Generate Angle: 80 degrees
Anode Voltage: 80 kV
Anode Power: 0.4–0.5 mA
Cooling/Duty Cycle: Oil Cooling / 100%







Image System

1. X-ray Sensor: L-shaped photodiode array (monoenergetic), 12-bit depth
2. Monitor: High-resolution color LCD, 19-inch
3. Image Processing: Edge enhancement, image strengthening, brightness adjustment, darkening reduction, image recall, and retrieval
4. Image Grey Level: 4096 levels
5. Image Max Resolution: 1024 x 1280 pixels
6. Image Processing: 24-bit for real-time processing
7. Image Storage: Can store up to 60,000 images in real time
8. Zones & Zoom: 1–9 regions, 2x–16x magnification, full-screen continuous observation


Installation Data

Operation Temperature/Humidity: 0°C – 45°C / 20% – 95% (non-condensing)
Storage Temperature/Humidity: -20°C – 60°C / 20% – 95% (non-condensing)
Operation Power: 220 VAC (±10%), 50 Hz ±3
Power Consumption: 1.0 kW (max), 0.3 kW (working)
Noise Level: < 65 dB

Single Energy Small Parcel X Ray Baggage Scanner for Hotel Bank

Welded Plate Heat Exchanger

Welded Plate Heat Exchanger belongs to Recuperative Heat Exchanger, and is fully welded between every two plates to form channels through which the fluids with different temperature can flow and exchange heat. The high temperature fluid transfers heat to the low temperature fluid through the plates, thereby realize heat exchanging. The flow velocity of each fluid can be controlled by plates distance, so as to meet the working condition perfectly. In addition, there is also the semi-welded type plate heat exchange.



Welded Plate Heat Exchanger is mainly for vapor condensing and liquid to liquid heat exchanging, to meet with various requirements from industries like power sector, petrochemical, petroleum coking, pharmacy, metallurgy, refrigeration, paper processing etc. Optimal arrangement of various channels also make sure of high heat transfer efficiency and minimal pressure loss. Besides, its frame is detachable, and therefore it is convenient to have either mechanical cleaning or chemical cleaning as per actual situations.

Welded Plate Heat Exchanger,Welded Heat Exchangers,Weld Plate Heat Exchanger,Semi Welded Plate Heat Exchanger

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jmheatexchanger.com