Three Axis High Frequency Vertical Horizontal Vibration Test Machine
Model: XB-OTS-DC500
Description & Application:
 High Frequency Electromagnetic Vibration Test Machine / (Electromagnetic Vibration Test Equipment) is used to educational, research, and laboratory environments. Adopted the double- magnetic circuit structure, self-generated skeleton action circles, Airborne Support and roller bearings and linear guidance, trunnion isolation advanced modern technology and special technology, can be completed in X,Y,Z three-axis sinusoidal vibration test and broadband random vibration tests, to be completed by the classical (half - sine, trapezoidal, saw tooth wave) pulse and shock response spectrum test. These products are widely used in national defense, weapons, aviation, aerospace, communications, electronics, electrical appliances, communications, home appliances and other fields.
Â
Feature:
1. Well-designed dynamic circle skeleton, with a higher stage axial resonance frequency.
2. Two-magnetic circuit, magnetic flux leakage low, compact structure and rational.
3. Rocker Rod roller bearings straight and import-oriented composite body stiffness orientation, eccentric load capacity.
4. Trunnion isolation foundation dedicated to hormone use, the installation of mobile convenience.
5. Advanced technology move around the system to ensure that the dynamic circle of high reliability.
6. New duct design and enhance the cooling effect.
7. Static stiffness, dynamic stiffness of the bearing small balloon, raising the vibration table bearing capacity, improve low-frequency performance.
Composition of High Frequency Electromagnetic Vibration Test Machine
Vibration test bench, power amplify, cooling fan,Slip table,vertical expander
Horizontal Stand features:
Within small loading bench to realize higher acceleration and working frequency, to improve the loading capacity and performance of whole machine bench.
Horizontal bench and vibration bench are integral type, with perfect structure, convenience to install and adjust.
Static pressure track, V-shape, with capacity of slope-resistant and bias-loading resistant.
Built-in oil pump, good structure and easy operating.
Vertical Extended-bench features:
VT vertical extended-bench and specified clamps, precision calculated, elaborate design, to ensure the customer acquired the best performance according to perfect
Â
Specification :
| Brand | OTS |
| Type | Â Circular |
| Transmission Structure |  Electromagnetic Shaker |
| Works |  Electrodynamic Vibration |
| Axis | 3Â Axis |
| Frequency range | 5-2000Hz |
| Amplitude | 10-16hz+-10mm |
| Sweep rate | 1 octave/min |
| Number of axes | 3(X-Y-Z) |
| Duration | 90 min 2 cycles per axis |
| Supporting Device |  Coil Spring |
| Customized | Â Customized |
| Rated Sine Force (N) |  1000 to 3500000 |
| Frequency Range (Hz) |  3 to 3500 |
| Rated Velocity(M/S) |  1.2 to 1.8 |
| Function |  High Frequency Vibrating Screen |
| Usage |  Experiments Shaker |
| Object |  Electronic Parts |
| Running Track |  Circular Vibrating Screen |
| Condition | Â New |
| Rated Random Force (N) |  1000 to 3500000 |
| Rated Acceleration(M/S2) |  400 to 1000 |
| Rated Displacement (P-P, mm) |  25 to 91 |
| Power | Â AC380VÂ ,3Â pHÂ 3Â Lines |
| Warranty | Â 1Â Year |
| Certificate | Â CE |
Packing & Shipping:
1.Strong standard wood case, inner plastic films wrapped for Vibration Testing Machine
2. Usually we delivery the equipment by air,by sea or by express. it depends on customerÂ
Our Services:
We are here to help you.Services available:
Replacement manuals
Consumables and replacement parts
On-site maintenance and repair
Warranty support
Over-the-phone service support and advice
If you have an OTS chamber  , we will do our best to help you in whatever way we can.
Manuals:PDF files of manuals for current models are available free.Please contact us to request a copy.Older and printed copies at additional charge.
Service repair:We prefer you contact us direct at the factory with any problems you may be experiencing.We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs.Rarely can a local contractor get all that done for you as quickly as we can.We also guarantee the work .
Our Company
OTS (Overall Testing System)
Was established in 1978, with 35 years' history
With 30,000 square meter salable production base and 120 employees
Is one of the leading companies solely dedicated to manufacture of
Environmental Simulation Test Chambers ,Physical Testing Equipment .
(such as  constant temperature and humidity chambers, environmental chambers, climatic test chambers, rain and dust test chambers,thermal shock test chambers,fast change rate chambers, salt spray chamber,UV test chambers,walk in test chambers and other special customized test chambers  ;Tensile testing machine, vibration test machine ,carton compression testing machines, bursting strength testing machine etc.) ..
OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing requirement.With offices in unrivaled quality advantage, dynamic management team with superb manufacturing process,also the quality with the world norms:ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI, AATCC, IEC, VDE...
Â
FAQ:
Q1 :Can you customize the product?
A:Yes, we can customize any products according to requirements.Hot selling lab electronic temperature humidity cabinet/Environmental climate test chamber also can be customized.
Q2 :How to choose the most suitable products?
A:Our professional team will give you the best suggestion,just be  patiently to tell us the information about the parameters your required.
Q3 :Can you arrange installations and commissioning in our lab?
A:Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate
Secondly;We had detailed operation manual with chamber , any problems you can find and solve in it
Thirdly, some of customized chambers we should to install and teach your team to operate .
Model: XB-OTS-DC500
Description & Application:
 High Frequency Electromagnetic Vibration Test Machine / (Electromagnetic Vibration Test Equipment) is used to educational, research, and laboratory environments. Adopted the double- magnetic circuit structure, self-generated skeleton action circles, Airborne Support and roller bearings and linear guidance, trunnion isolation advanced modern technology and special technology, can be completed in X,Y,Z three-axis sinusoidal vibration test and broadband random vibration tests, to be completed by the classical (half - sine, trapezoidal, saw tooth wave) pulse and shock response spectrum test. These products are widely used in national defense, weapons, aviation, aerospace, communications, electronics, electrical appliances, communications, home appliances and other fields.
Â
Feature:
1. Well-designed dynamic circle skeleton, with a higher stage axial resonance frequency.
2. Two-magnetic circuit, magnetic flux leakage low, compact structure and rational.
3. Rocker Rod roller bearings straight and import-oriented composite body stiffness orientation, eccentric load capacity.
4. Trunnion isolation foundation dedicated to hormone use, the installation of mobile convenience.
5. Advanced technology move around the system to ensure that the dynamic circle of high reliability.
6. New duct design and enhance the cooling effect.
7. Static stiffness, dynamic stiffness of the bearing small balloon, raising the vibration table bearing capacity, improve low-frequency performance.
Composition of High Frequency Electromagnetic Vibration Test Machine
Vibration test bench, power amplify, cooling fan,Slip table,vertical expander
Horizontal Stand features:
Within small loading bench to realize higher acceleration and working frequency, to improve the loading capacity and performance of whole machine bench.
Horizontal bench and vibration bench are integral type, with perfect structure, convenience to install and adjust.
Static pressure track, V-shape, with capacity of slope-resistant and bias-loading resistant.
Built-in oil pump, good structure and easy operating.
Vertical Extended-bench features:
VT vertical extended-bench and specified clamps, precision calculated, elaborate design, to ensure the customer acquired the best performance according to perfect
Â
Specification :
| Brand | OTS |
| Type | Â Circular |
| Transmission Structure |  Electromagnetic Shaker |
| Works |  Electrodynamic Vibration |
| Axis | 3Â Axis |
| Frequency range | 5-2000Hz |
| Amplitude | 10-16hz+-10mm |
| Sweep rate | 1 octave/min |
| Number of axes | 3(X-Y-Z) |
| Duration | 90 min 2 cycles per axis |
| Supporting Device |  Coil Spring |
| Customized | Â Customized |
| Rated Sine Force (N) |  1000 to 3500000 |
| Frequency Range (Hz) |  3 to 3500 |
| Rated Velocity(M/S) |  1.2 to 1.8 |
| Function |  High Frequency Vibrating Screen |
| Usage |  Experiments Shaker |
| Object |  Electronic Parts |
| Running Track |  Circular Vibrating Screen |
| Condition | Â New |
| Rated Random Force (N) |  1000 to 3500000 |
| Rated Acceleration(M/S2) |  400 to 1000 |
| Rated Displacement (P-P, mm) |  25 to 91 |
| Power | Â AC380VÂ ,3Â pHÂ 3Â Lines |
| Warranty | Â 1Â Year |
| Certificate | Â CE |
Packing & Shipping:
1.Strong standard wood case, inner plastic films wrapped for Vibration Testing Machine
2. Usually we delivery the equipment by air,by sea or by express. it depends on customerÂ
Our Services:
We are here to help you.Services available:
Replacement manuals
Consumables and replacement parts
On-site maintenance and repair
Warranty support
Over-the-phone service support and advice
If you have an OTS chamber  , we will do our best to help you in whatever way we can.
Manuals:PDF files of manuals for current models are available free.Please contact us to request a copy.Older and printed copies at additional charge.
Service repair:We prefer you contact us direct at the factory with any problems you may be experiencing.We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs.Rarely can a local contractor get all that done for you as quickly as we can.We also guarantee the work .
Our Company
OTS (Overall Testing System)
Was established in 1978, with 35 years' history
With 30,000 square meter salable production base and 120 employees
Is one of the leading companies solely dedicated to manufacture of
Environmental Simulation Test Chambers ,Physical Testing Equipment .
(such as  constant temperature and humidity chambers, environmental chambers, climatic test chambers, rain and dust test chambers,thermal shock test chambers,fast change rate chambers, salt spray chamber,UV test chambers,walk in test chambers and other special customized test chambers  ;Tensile testing machine, vibration test machine ,carton compression testing machines, bursting strength testing machine etc.) ..
OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing requirement.With offices in unrivaled quality advantage, dynamic management team with superb manufacturing process,also the quality with the world norms:ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI, AATCC, IEC, VDE...
Â
FAQ:
Q1 :Can you customize the product?
A:Yes, we can customize any products according to requirements.Hot selling lab electronic temperature humidity cabinet/Environmental climate test chamber also can be customized.
Q2 :How to choose the most suitable products?
A:Our professional team will give you the best suggestion,just be  patiently to tell us the information about the parameters your required.
Q3 :Can you arrange installations and commissioning in our lab?
A:Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate
Secondly;We had detailed operation manual with chamber , any problems you can find and solve in it
Thirdly, some of customized chambers we should to install and teach your team to operate .
Mold HVAC VENTS BEFORE AND AFTER
Mold infestation usually comes with a musty odor. If there is mold in your HVAC system, you should be able to smell the strange musty odor in multiple adjacent rooms. If the mold problem is quite severe, you should be able to spot the growth around the ducts, in the vents and the other parts of the ductwork. The spores are too small for spotting without specialized equipment, and you will not see any other overt signs until the infestation is rampant. In most cases, people have to rely on their sense of smell to detect the presence of this stealthy intruder in their homes.
What causes mold infestation in the HVAC air ducts?
A warm location with high water vapor content is particularly prone to mold buildup within the ducts. Water vapor can form within the duct system when cold air passes through, and when there is high water vapor content in the outside environment, the water droplets usually collect instead of evaporating. It forms the most conducive environment for mold growth. The nutrition for the mold usually comes from dust, dirt, dead skin cells, pollen, and animal dander that collects over months inside the duct along with the water.
What are the signs of mold in air ducts?
Here are a few definitive signs of mold growth within home HVAC systems:
A strong mildew-like or musty smell throughout the house or at least in a few adjacent rooms.
Your nose, throat, and eyes feel irritated when you switch on the air conditioning or step inside an air-conditioned room.
You are experiencing allergic symptoms including a runny nose, rashes, and watering eyes.
You or your family is suffering from unexplainable headaches that go away when you step outside.
You feel nausea, fatigue, and dizziness only when you are home.
You can see the mold growing within the intake vents and around the air ducts and drip pans.
Therefore, if you live in a warm climate and your home smells musty all the time, you have the perfect reason to suspect a mold infestation within the central air conditioning system. You should never wait for the visible signs of infestation to manifest before taking action. You may not be able to see specific sections of your HVAC ductwork from the outside. In that case, you should ask for professional help.
How can homeowners tackle the problem of mold and how to get rid of mold in air ducts?
Sometimes, the mold problem is not overwhelming, and homeowners prefer to deal with the issue on their own. It calls for some robust DIY mold removal techniques. The EPA recommends the employment of professional mold removing services when the suspected mold cover spreads over ten sq ft. If the infestation in your heating ducts is not as severe, you can try removing the growth with ingredients that you can find at your local Home Depot. Here is information on how to get rid of mold in air ducts.
Removing Mold from Your HVAC System:
Selection of the cleaning solution is the first and the most crucial step that decides the fate of the HVAC system inside your home and ultimately if you are successful in how to get rid of mold in air ducts. The cleaning agent you choose can either remove mold or let it fester secretly. Therefore, you need to be cautious when selecting a DIY solution for your mold problem.
Heat Exchanger Mold,Heat Exchanger Mould,Heat Exchanger Injection Mold,Plate Heat Exchanger Mould
Liaoning LotusNine International Trade co.,ltd , https://www.lj-heatexchangers.com