2% Purge Air, -40c PDP, 1.5m3/Min Desiccant Air Dryer

Model NO.: Biteman B-series heated, BTGMXD015-B, 1.5m3/min
Modular Units Desiccant Chamber: Replaceable Factory Filled Desiccant Chamber
Pressure Dew Point: Minus 40 Centigrade Degree
Heat or Heatless: Heat
Trademark: BITEMAN
Transport Package: Wooden Case
Specification: ISO9000, ISO8573.2
Origin: Shenzhen China
BITEMAN Modular units heated desiccant air dryer

2% Purge Air, -40c PDP, 1.5m3/Min Desiccant Air Dryer

2% Purge Air, -40c PDP, 1.5m3/Min Desiccant Air Dryer

Unique features
-Less than 2% purge air with only 0.4kw to 4.4kw power consumption,no auxiliary motor
-Pressure and inlet temperature is digital readout on screen,purge air gauge allows manually control regeneration air according to the wanted pressure dew point
-Small desiccan chambers' group,each chamber unit is independent and detachable
-Replace with factory filled desiccant chamber ,ease of maintenance and constant pressure dew point -40C (-40F) is ensured
-The lowest operation cost,user could recoup  dryer investment in three years by saving huge air and electricity
-1/3 size to traditional dryer
-The shortest downtime
-Using Molecular sieve as desiccant

2% Purge Air, -40c PDP, 1.5m3/Min Desiccant Air Dryer

Details of advantages

Innovative structure with patents,employs small desiccant chamber unit

1.Air flow equally and evenly pass through each desiccant chamber
2.Avoid channelling effect which more likely happens in traditional desiccant dryer
3.Small chamber allow no mandatory annul inspection
4.Molecular sieve capability is much better than Alumina and silicon desiccant in traditional dryer
5.PLC controller ,Full function touch panel control

Structure and operation

Biteman dryer have two groups of desiccant chambers,A and B ,according to flow rate,A and B shift between adsorption and regeneration





Ease of replacement of desiccant chambers,it can't be more simpler comparing to exchange of desiccant,only one wrench it is done.Further more,needn't worry the desiccant density after refilling because it is filled in our factory to keep constant and stable pressure dew point,just like new dryer from factory
Technical data
B-series            Heatless        (-40ºC dew point)
MODEL Port (inch) Flow rate (m³/min) Dimension (mm)
@5~6bar @6~7bar @7~10bar L W H
BTGMXW065-B G2 4.8 5.8 6.5 451 240 1628
BTGMXW085-B G2 6 7.4 8.5 560 240 1628
BTGMXW106-B G2 7.4 9.1 10.6 668 240 1628
BTGMXW146-B G2 9.8 12 14.6 885 240 1628
BTGMXW165-B G2 11.6 14.2 16.5 994 240 1628
BTGMXW206-B G3 14.6 17.8 20.6 763 480 1628
BTGMXW248-B G3 16.7 20.5 24.8 794 480 1628
BTGMXW295-B G3 21.5 26.3 29.5 903 480 1628
BTGMXW336-B G3 24.1 29.5 33.6 1012 480 1628
BTGMXW385-B G3 26.8 32.8 38.5 1121 480 1628
BTGMXW425-B G3 29.7 36.4 42.5 1230 480 1628
BTGMXW465-B G4 32.7 40.1 46.5 1339 480 1628
Marks
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC;
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC;
Technical date:Pressure dew point≤-40ºC
         Purge air≤5%
         Pressure drop≤0.012MP
         Noise≤75dB(average);
 

 
B-series         Heat            (-40ºC dew point)
MODEL Port (inch) Flow rate (m³/min) Dimension (mm) Max Power
@5~6bar @6~7bar @7~10bar L W H Kw/1 Ph
BTGMXD065-B G2 4.8 5.8 6.5 451 240 1628 0.8
BTGMXD085-B G2 6 7.4 8.5 560 240 1628 1
BTGMXD106-B G2 7.4 9.1 10.6 668 240 1628 1
BTGMXD146-B G2 9.8 12 14.6 885 240 1628 1.4
BTGMXD165-B G2 11.6 14.2 16.5 994 240 1628 1.6
BTGMXD206-B G3 14.6 17.8 20.6 763 480 1628 2
BTGMXD248-B G3 16.7 20.5 24.8 794 480 1628 2.4
BTGMXD295-B G3 21.5 26.3 29.5 903 480 1628 2.8
BTGMXD336-B G3 24.1 29.5 33.6 1012 480 1628 3.2
BTGMXD385-B G3 26.8 32.8 38.5 1121 480 1628 3.6
BTGMXD425-B G3 29.7 36.4 42.5 1230 480 1628 4
BTGMXD465-B G4 32.7 40.1 46.5 1339 480 1628 4.4
Marks
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC;
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC;
Technical date:Pressure dew point≤-40ºC
         Purge air: ≤2%
         Pressure drop≤0.012MP
         Noise≤75dB(average); A fastener is a hardware device that mechanically joins or affixes two or more objects together. The industry is strongly tied to the production of automobiles, aircraft, appliances, agricultural machinery, commercial construction, and infrastructure. We make high quality custom fasteners including but not limited to bolt, screw, nut, pin, washer, stud, clamp, rivet in different raw materials.

Special Fasteners

Special Fasteners,Custom Fastener,Special Steel Screw,Special Nut

Ningbo Allytech Imp. & Exp. Co., Ltd. , http://www.allytechchina.com