Recently, the Bureau of Special Equipment of the General Administration of Quality Supervision, Inspection and Quarantine issued notices to further advance the fight against energy-saving and emission reduction of coal-fired boilers. The notice required that all relevant units strictly control the entry of new boilers, complete the energy efficiency survey of coal-fired industrial boilers on schedule, vigorously promote the boiler system safety and energy saving standardization management, strengthen boiler energy conservation and emission reduction knowledge training, and strengthen supervision and inspection.
To implement the State Council's "13th Five-Year Plan" Integrated Work Program for Energy Saving and Emission Reduction, in accordance with the "Key Points for Special Equipment Safety Supervision and Energy Conservation Supervision in 2017" and the "Quality Inspection Bureau Coal-fired Boiler for Energy Saving and Emission Reduction Tactics Work Plan" deployment, 2017 We must further intensify our work and continue to advance the battle against energy-saving and emission-reduction of coal-fired boilers.The relevant requirements are hereby notified as follows, please implement them in earnest.
First, strictly control the new boiler access
Notice of the State Council on Issuing the Action Plan for the Prevention and Control of Atmospheric Pollution (Guo Fa (2013) No. 37) and Notice on Printing and Distributing the Implementation Plan of the Energy Saving and Environmental Protection Comprehensive Improvement Project for Coal-fired Boilers (Tianjin Huanzi [2014] No. 2451) The document has stipulated that new-built coal-fired boilers with a capacity of 20 tons/hour or less must be newly built in urban-grade districts or above. No coal-fired boilers with a capacity of 10 tons/hour or less can be built in other areas in principle. Beijing, Tianjin, Hebei, Shanxi, and Shandong Municipal built-up and above urban built-up areas may in principle not build new coal-fired boilers. Some regions have issued relevant regulations and put more stringent restrictions on new coal-fired boilers. All the geological inspection departments shall conscientiously implement the relevant national and local regulations. No coal-fired boilers that do not meet the above requirements shall be subject to installation supervision and inspection, and shall not be registered for use. At the same time, all localities shall further strengthen the energy efficiency test of the boiler styling products, and do a good job of implementing the “Boiler Energy Conservation Technical Supervision and Management Regulations†(No. 1 Revision Sheet) as required, and shut down the effectiveness of good boiler products.
Second, to complete the use of coal-fired industrial boiler energy efficiency survey task
The energy efficiency survey of coal-fired industrial boilers is an important basic work for the implementation of the integrated improvement project for coal-fired boiler energy saving and environmental protection. All localities must speed up progress to ensure that the energy efficiency of industrial coal-fired boilers with coal consumption exceeding 10 tons/hour is fully completed in 2017 in the region. task. The boiler data from the completed census shall be promptly included in the “Statistical Table for Energy Efficiency Survey of Coal-fired Industrial Boilers in Useâ€, and the statistics shall be submitted to the Bureau at the end of each quarter. The energy efficiency survey of coal-fired industrial boilers is proposed to be incorporated into the “Double Control†assessment indicators of the total energy consumption of the provincial people’s government by the State Council. Local governments must report their work situations and difficulties and problems in a timely manner to local governments and strive for funding. stand by.
All localities must strengthen the basic data management of boilers and remove the eliminated boilers from the database in a timely manner to ensure that the boiler data are true and reliable. At the same time, it is necessary to further establish and improve the existing boiler dynamic monitoring system, and timely incorporate the boiler energy-saving environmental protection related information and coal-fired boiler census data. The Bureau will establish a national census data platform for coal-fired boilers to achieve national data interconnection.
Third, vigorously promote the boiler system safety and energy saving standardization management
The General Administration of Administration and the various geological supervision departments should speed up the promotion of boiler system safety and energy saving standardization management, and strive to fully complete the boiler system safety and energy saving compliance demonstration task in 2017. In regions where tasks have been completed, it is necessary to continue to promote the standardization management of boiler system safety and energy saving and further increase the proportion of compliance. At the same time, all localities must sum up the experience of standard demonstration activities in a timely manner, identify outstanding examples, and promote the use of boilers by site meetings or experience exchange meetings.
Fourth, strengthen the boiler energy conservation and emission reduction knowledge training
In 2017, the Bureau will continue to arrange special funds and entrust relevant agencies to conduct special training on energy conservation and emission reduction for boiler operator training teachers, boiler monitoring personnel, and boiler energy efficiency testing technology backbones. This year, 100, 300, and 300 will be completed respectively. The training tasks must be well organized and mobilized and organized throughout the country. At the same time, all localities must formulate an annual training plan for the region, focusing on strengthening energy-saving and emission-reduction training for coal-fired industrial boiler operators of more than 10 tons/hour.
V. Strengthening supervision and inspection
The General Administration of Administration and various geological inspection departments shall further strengthen the supervision and inspection of the implementation of boiler energy-saving standards. The first is to carry out supervision and inspection of boiler manufacturing enterprises, focusing on inspection of boiler design documents for energy conservation review and implementation of boiler styling product energy efficiency testing systems, compliance of boiler energy efficiency with product technical specifications and standards, and control of quality and energy conservation from the source; The second is to supervise and inspect the units that use the boilers, and to supervise and urge the enterprises to complete the periodical energy efficiency test of the boilers; thirdly, to carry out supervision and inspection on the inspection and inspection institutions, to check the energy-saving review of the boiler design documents and the boiler energy efficiency test, and to urge the boiler energy efficiency testing institutions to improve the testing. Quality and service level. The fourth is to check the application of the boiler dynamic monitoring system, and urge the rectification and updating of the database if it is not updated for a long time.
Sixth, further improve the service capacity of technical institutions
This year, the General Administration of China will jointly promulgate the “Boiler Energy Conservation and Environmental Protection Supervision and Administration Measures†together with relevant departments to promote the establishment of a three-in-one supervision system for boiler safety, energy conservation, and environmental protection. The General Administration of Quality Supervision, Inspection and Quarantine and the Ministry of Environmental Protection jointly encourage competent boiler energy efficiency testing organizations to carry out environmental testing. All localities must issue policies to support the construction of special equipment inspection and inspection agencies in the field of energy saving and environmental protection of special equipment, and improve the quality of boiler energy efficiency tests and environmental protection tests. The General Directorate will summarize the problems found in the supervision and spot checks of boiler energy efficiency testing institutions in recent years and report to relevant agencies. If there are serious problems and the rectification is not completed on schedule, the testing organization will be ordered to stop the energy efficiency test.
VII. Strengthening departmental linkage
In 2017, the General Administration of Development of the United Nations Development and Reform Commission will continue to publish an efficient boiler promotion catalog, and all localities must vigorously promote boiler manufacturing companies and organize relevant declarations. At the same time, all localities must actively understand the research and development of energy-saving technologies related to special equipment such as boilers, heat-exchange pressure vessels, elevators, etc. For advanced and applicable major energy-saving technologies, they can be submitted to the Bureau by the end of May, and the Bureau will recommend it to the National Development and Reform Commission. , and strive to be included in the national list of key energy-saving and low-carbon technology promotion. All localities must cooperate with relevant departments to eliminate backward coal-fired boilers, implement energy-saving and environmental-friendly reforms, and jointly promote the comprehensive upgrading of energy-saving and environmental-friendly coal-fired boilers. In particular, they must strengthen the communication of information with relevant departments, timely cancel the registration certificate of used boilers, and prevent them from being eliminated. Boiler transfer use.
Eight, on time to send the work summary
All localities must do a good job in the statistical work of the coal-fired boiler energy-saving and emission reduction countermeasures to ensure the authenticity and completeness of the data. Before December 1st, the "China Coal-fired Boiler Energy-Saving and Emissions Reduction Yearbook Information Table (2017)" (see 2017) (see Attachment), "Energy Efficiency Survey List for Coal-fired Industrial Boilers" (including all census data for the region) and energy-conservation work for high energy-consuming special equipment in 2017 are submitted to the Energy Conservation Department of the Bureau.
General Administration of Quality Supervision, Inspection and Quarantine, Special Equipment Bureau
Features: The machine tool mold is integrated, and the base, column and beam are optimized and strengthened to improve the overall rigidity of the machine tool.
application:
Processing materials: stainless steel, copper, aluminum, carbon steel, etc.
Applicable industries: molds, hardware, medical equipment, electronic products
Product use: mold, metal electrode, metal parts processing
CNC Engraving And Milling Machine
CNC Engraving And Milling Machine,CNC Milling Machine,Hobby CNC Milling Machine,CNC Engraving and Milling Machine Center
Jiangsu Changzhou Jinghua Numerical Control Equipment Co.,Ltd. , https://www.jkengraving.com