Wade Road, red jacket submersible pump global product manager Mr. Rick Fallley on the choice of red jacket submersible pumps and other issues of concern to you all answered one by one.
First, the same oil at the same time a typical number of oil guns and the number of single-gun oil required to select the key is to determine the required number of effective supply guns. On this basis, the type of submersible pump required can be determined based on the head-to-flow curve provided by Wirtrich.
For example, a gas station has 6 refueling guns for each oil, and the standard output for each gun is 40 liters / min. If the 3 cars add this oil at the same time according to the gas station's actual conditions and predicted traffic flow The most common case of goods, then the typical flow of submersible pumps can be 120 liters / minute to consider the optional red jacket 0.75 horsepower new submersible pump. According to the curve of the 0.75 horsepower submersible pump, three guns are refueled at the same time. The flow rate of each gun can reach 10 gallons / minute, that is 37.85 liters / minute, and the lift at this time can reach 67.5 feet, that is, 21 meters; all 6 The guns are also refueled at a rate of 7 gallons per minute, or 26.5 liters per minute, and the lift at this time can still reach 42 feet, or 12.8 meters.
Second, the working medium. The choice of submersible pump depends on whether the oil delivered contains additives. Vydrute each series of red jacket submersible pump has a special product for different working media, the customer when ordering the oil components can be described.
Third, lift. Unlike self-priming pumps, submersible pumps do not suffer from the so-called "suction stroke" problem, and the length and diameter of the submersible pump on the line, the number of T-joints and elbows, the diameter and depth of the tank, The height from the port to the bottom of the tanker is much less than the self-priming pump.
Red jacket submersible pump 0.75 horsepower / 220V4 "and 1.5 horsepower / 220V4" new enhanced telescopic tube submersible pump for gas stations and small depots. Large flow, installation, commissioning and maintenance is very simple and safe.
High strength steel tie rod are steel structural members made of carbon structural steel and alloy steel, processed by machining, heat treatment and surface anti-corrosion treatment, supplemented by adjusting sleeves, lock and joints etc. The steel tie rod are important components of steel structures for construction of giant, large span buildings and ship docks. They are mainly used for prestressed parts and large span buildings in construction projects. While the strength of the product is improved, but the plasticity index is not reduced, which satisfies the principle of using the same amount of strength in the architectural design. The tie rods, tie bars, tension rods and tension bars steel grades are specified as grade 460, grade 520, grade 550, grade 650, grade 785, grade 830, grade 930, grade 1080 etc.
Steel Tie Rod,Stainless Steel Tie Rods,Structural Steel Tie Bars,High Strength Steel Tie Rod
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdhighstrengthsteelbolts.com