Tungsten Single Screw and Barrel for PVC Pipe Rubber Extruder Machine

  • Model NO.: Dia 75-200mm Dia 30-300mm
  • Customized: Customized
  • Type of General Rubber Machinery: Rubber Extruder
  • Warranty: 1 Year
  • Nitrided Layer Depth: 0.5-0.8mm
  • Nitrided Brittleness: Less Than Grade 1
  • Linearity of Screw: 0.015mm
  • Specification: ISO9001: 2008
  • HS Code: 84779000
  • Certification: ISO
  • Type: General Rubber Machinery
  • Type of Tire Machinery: Rubber Regeneration Machinery
  • Screw Barrel: Tungsten Single Screw and Barrel for PVC Pipe
  • Nitrided Hardness: 900-1000hv
  • Surface Roughness: Ra0.4
  • Trademark: Zhongyang
  • Origin: Zhejiang of China
Tungsten single screw and barrel for PVC pipe rubber extruder

Diameter of pin screw and barrel: Φ 75mm-Φ 200mm
Diameter of cold feed or hot feed screw and barrel: Φ 30mm-Φ 300 mm
L/D ratio: 12-18

Technical Information

Base Materials:
1)38CrMoAlA(JIS SACM645)
2)42CrMo(AISI 4140)
3)4Cr5MoSi V1 (JIS SKD-61)

Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide

Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: >=950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm

Warranty and service: 1 year

Our advantages:
1)Excellent raw materials
2)Good customer service
3)Rapid delivery
4)Reasonable price
5)Production quickly

Experienced manufacture, we will be the best choice.

The stone mill flour preserves the original flavor of the wheat. All kinds of pasta made with the milling flour mill are flexible, rich in wheat fragrance and higher in nutritional value. It is a healthy and healthy food of natural green. From wheat input to flour milling machinery to flour production, the flour processing industry's production process can be roughly divided into four steps:
The first step is to clean up the impurities. Wheat into the high efficiency combination grain screen, using a plane rotary screen to remove the soil in wheat, the use of magnetic separator to remove metal impurities, the use of gravity classifier to remove stone and inferior wheat.
Second step cleaning and drying. The wheat is added into the wheat washing machine, and water is injected and dried to further clean the impurities.
The third step is to moisten the wheat. The wheat will be washed again into the wheat machine warehouse, moistening for about 10 hours (wetting 1%).
Fourth steps to make powder. The cleaned wheat was put into the grinding machine, and after repeated grinding, the wheat bran and flour were separated.

The low speed grinding characteristics of the mill Flour Machine also maintain the molecular structure of the flour without any additives. When the noodles are boiled, the color of the noodle soup of the flour is pale yellow, and the other flour noodle soup with additives is white. Long term consumption is beneficial to the human body.

Stone mill flour machine

Mobile Phone: +8613153736907   +8613153738637


Address: No. 024, Quan Fulu West, Surabaya County, Jining, Shandong

Country: China

If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inquiry,Please send mail directly to us.

Stone Mill Flour Machine

Stone Mill Flour Machine,Large Stone Mill Machine,Stone Milling Machine,Grind Flour Machine

Shandong Hengyi kaifeng Machinery Co.,Ltd , https://www.xhykf.com