Vibrating fluidized bed dryer combines drying and cooling

Drying and cooling through a fluidized bed dryer and cooler, Xinmai successfully integrates quality, efficiency and profitability into one machine that is both durable and versatile.
In particular, vibrating fluidized bed dryers are characterized by high profitability: the heat released during the cooling phase is used for drying, thus reducing energy consumption by up to 15%.
For decades, Xinmai has been a successful manufacturer of vibrating and stationary fluidized bed dryers and coolers for a variety of industries. It is these years of experience that not only enabled our company to qualify for the construction of custom systems, but also made the company a leading supplier of turnkey drying equipment.
The vibrating fluidized bed dryer works on the principle of fluidized bed, ie the product to be dried or cooled is fed into the machine on a distribution plate (for example a perforated plate or special sieve), and the product flows through the air or other from the bottom to the top. Gaseous drying medium. This ensures very mild drying. Static or vibrating designs are used depending on grain size and material properties.
Fixed fluidized bed dryers for fine particles (6 mm) can be equipped with heat exchangers to reduce the amount of drying or cooling air required. This can significantly reduce the size of the machine.
Vibrating fluidized bed dryers for bulk materials with a wide range of particle sizes and/or coarse particles: vibration can achieve optimum drying of the product even at low flow rates. Fluidized bed dryers are available in two different versions depending on material properties or machine size.
The vibrating fluidized bed dryer is built to specifications and has a dry area of ​​0.2 square meters to 60 square meters.
Being as close as possible to our customers With our extensive product portfolio, we offer our customers the best possible product processing – not only in stand-alone systems, but also in complete concept and turnkey plants. Only the best factory concept can guarantee economic and technological advantages for our customers.
In order to best meet the requirements of specific customers, we provide our customers with a comprehensive testing facility that can perform the system's testing process based on the task at hand.

Air-cooled Industrial Chiller

 
 
New-designed RCM series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding
process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling.
They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surrounding factors. Therefore they
are necessary good equipments in modern industry.
1. Cooling temperature range 5-35 ℃.
2. High-capacity tube-in-shell evaporator with very good heat exchange performance especially under high ambient temperature condition.
3. Tube-fin double condensers with excellent heat transfer and rapid cooling.
4. Stainless steel warm-keeping tank.
5. R22 refrigerant to be used for efficient cooling.
6. R407 environment-friendly refrigerant is optional to use.
7. Overload protection for compressor, pump and blower.
8. Independent Temperature Controller, anti-freeze protection.
9. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
10. Warm-keeping design for all piping to avoid partial convection.

11. Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonic.

<

Model		RCM3A	RCM5A	RCM8A	RCM10A	RCM12A	RCM15A	RCM20A	RCM25A	RCM30A
chillling capaciity	KW	7.5	12.5	18	23	28	36	46	58	72
	KCAL/H	6450	10750	15480	19780	24080	30960	39560	49880	61920
Compressor type	Scroll compressor
Compressor  outputpower	HP	3	5	8	10	12	15	20	25	30
Refrigerant	R22/R407C
Refrigerant Filling  quantity	KG	2	3	5	6	7.5	10	12	15	20
Pump power	KW	0.75	0.75	0.75	1.5	1.5	2.2	2.2	2.2	2.2
Pump max.flowrate	L/MIN	100	100	100	200	200	600	600	600	600
Pipe size outlet	INCH	1"	1"	1"	1．5"	1.5	1.5"	2.5"	2.5"	2.5"
Pipe size outlet	INCH	1"	1"	1"	1．5"	1.5	1.5"	2.5"	2.5"	2.5"
Blower power	KW	0.25	0.19x2	0.25x2	0.42x2	0.25x4	0.25x4	0.42x4	0.42x6	0.42x6
Tank capacity	L	56	65	113	129	173	173	271	350	400
(L)	mm	1090	1250	1350	1350	1700	1700	1900	2150	2150
(W)	mm	760	760	860	960	1200	1200	1200	1480	1480
(H)	mm	1250	1320	1560	1620	1750	1750	1750	1800	1800

Scroll Type Air-cooled Industrial Chiller

Scroll Type Air-cooled Industrial Chiller,Air-cooled Industrial Chiller,Air-cooled Scroll Type Micro Industrial Chiller,Standard Air-cooled Industrial Chiller

Ningbo Beilun Rhong Machinery Manufacturing Co., Ltd. , https://www.rhongmachinery.com