In order to give full play to the advantages of the Jiuquan triple roller gate introduced by Jiuquan's three roller gates agent, and to bring more convenience to our customers, please follow the following precautions when installing the three roller gates in Jiuquan:
The first point, the preparation of Jiuquan three roller gate gate before installation:
1) Without permission, do not add peripheral equipment on the Jiuquan three-roll gate equipment and ensure that the equipment is grounded reliably and that the equipment is safe and reliable;
2) When the Jiuquan triple roller gate is used outdoors, a 100mm to 200mm high cement installation platform shall be built at the installation location of the three roller gates in Jiuquan so that the tide can be damped; at the same time, above the equipment, rain shelter facilities such as sunshades shall be installed. It is recommended not to place the equipment directly in an open air environment;
3) When installing the three-roll gate of Jiuquan, please open the cover of the chassis, connect the ~220V power supply, and ground it reliably. When everything is ready, close the air switch and turn on the main board L5. The L6 lamp is on, the motherboard number pipe shows "RUN", the lift bar raises, and the gate is in working condition.
4) When the Jiuquan three roller gate external control system (access control, fingerprint, etc.), please determine what signal (dry contact, active output, etc.) dry contact output the controller outputs, as long as the two lines are connected to the gate OPEN-L, OPEN-R, and VDD are sufficient. The three-roller gate is determined according to the customer's requirements. For active output, the "+" "-" of the output signal must first be determined, and the "+" terminal must be connected to the OPEN-. L or OPEN-R, "--" is connected to the motherboard's "GND" (voltage range: 5V ~ 12V).
The second point, during the use of Jiuquan three roller gates:
During the use of the three-roll gate brake, please regulate your behavior. The specific method is as follows:
1. Please swipe your card outside the yellow line. The Jiuquan three-roll gate gate is in place and there is a direction indication arrow to pass through. In the process of walking, do not stay in the passage or return after passing. This greatly improves the Channel traffic.
2. During the passage, do not follow the access into the three-roll gate passage, and do not squeeze the card to avoid causing the card to open.
3. When you see that the three-roll gate gate is in the open position, please do not forget to swipe the card (for the delayed closing function), you do indeed meet the requirements of one card and one person.
4. Do not artificially damage the Jiuquan three-roll gate brake (man-made damage is not covered by the warranty). For details, please refer to Appendix 5. In the course of use, if any abnormality is found, please cut off the power in a timely manner and contact our aftermarket department. We will serve you sincerely.
6. The three-roll gate shall be maintained regularly to clean the dust inside and outside the chassis, add lubricant to the mechanical connection parts, etc. to ensure the normal operation of the equipment.
The manufacturing and production processes around the world have been developing and innovating at an increasingly rapid rate, and as innovation evolves, so too must all of the processes and people that are helping to drive it. Laser cutting able to work faster and for longer, more precisely which has been adopted in numerous industries, including automotive, aerospace, electronics, semiconductors and medical. It has huge range advantages such as
1)Non-contact process
2)Low power consumption
3)A safer method
4)Can work with many different materials
5)Incredibly precision
6)One laser can be used for multiple applications
Laser Cutting Engraving Machine
Laser Cutting Engraving Machine,Laser Engraving Machine Leather,Cnc Metal Cutting Machines,Plastic Engraving Machine
Shandong Meiman Laser Technology Co., Ltd. , https://www.meimanlasers.com