Jiangsu Jinxiang Reducer Co., Ltd. “special gear reducer for three-high mill†recently obtained national utility model patents, which is the eleventh patent that the company has obtained.
It is reported that at present, the domestic metallurgical industry has started to use a rolling mill that drives the rolls in three separate units. The market demand is large, and most of them are imported from abroad. However, the drive shaft of the imported equipment adopts a hollow split body structure, and there is no positioning support at both ends of the telescopic part, which may cause the front-end coupling to droop; the collision during docking may damage the equipment; at the same time, the gear box has a complex structure and is inconvenient to adjust and maintain. Jiangsu Jinxiang provides a special gear reduction box for a three-high rolling mill. Its advantage is that the drive shaft adopts spline as a moving pair and can be rotated or moved axially; the return spring is installed in the hollow output shaft and has sufficient pre-load. The tight force ensures that the drive shaft can be automatically reset after the hydraulic cylinder pulls back and pressure is released. It is easy to manufacture and easy to install and maintain. It can realize rapid rack change, free rolling within a certain specification range, and guarantees trouble-free operation of the rolling mill with reliable and safe performance. . The gearbox can be used for both hot strip mills and tandem cold mills. It can be used for reducers as well as sizing mills and precision sizing mills.
At present, the drying tower of the Corn Drying Tower is operated in succession. The tower is installed outdoors. The dry tower is composed of storage layer, dry layer, tempering layer, cooling section, grain unloading organization, emergency grain unloading organization, tower, hot air suction organization, moisture removal organization, hot air fan organization, cooling fan organization, required motor and others Components. Commonly used in large-scale grain storage projects. Suitable for dryness of rice, sorghum, soybean, corn, wheat and other cereals.
During the dry period at the top, the high-heat air rapidly warms the grain and removes part of the surface of the particles.
In the moderate heating stage, a large amount of water is taken away by the moderately heated air.
After passing through the high heat and medium heat stages, the temperature of the particles increases, so low heat air is used in the dry stage at the bottom. Low-calorie air can easily remove the moisture inside the grain, but it is necessary to prevent the grain temperature from being too high.
The dry grain enters the cooling stage. After sufficient cooling, the grain with moisture and temperature can directly enter the silo for storage.
Corn Drying Tower
Corn Drying Tower,Maize Dryer Machine,Grain Drying Tower,Corn Drying Equipment
JINFENG DRYING EQUIPMENT CO.,LTD , https://www.jf-graindry.com