As we all know, heat pump compressors are like the heart of air energy water heaters. Compressor technology is one of the key technologies of air energy water heaters. The heat energy of the air energy water heater using the inverse Carnot principle is mainly to absorb heat energy from the air freely through the heat pump compressor. The performance of the heat pump compressor is strong or not, the quality is good or bad, and the efficiency will directly affect its "pump heat" ability to the air, which in turn affects the heating effect of the air energy water heater. Therefore, through technical innovation and innovation, comprehensive improvement of the performance, quality and efficiency of heat pump compressors is the key to achieving high efficiency and energy saving of air energy water heaters.
In addition, the operation of air-energy water heaters requires low-boiling cold medium to transfer heat. In low-temperature environments, the heat transfer efficiency is affected accordingly, and this is also overcome by upgrading the compressor technology. Based on the core technology status of compressor technology in heat pump products, many large brand heat pump companies value the impact of compressor technology on the energy efficiency of the entire machine. For example, Nuente, the industry's first brand, has always attached great importance to the use of world-class brand compressor technology, through repeated testing and testing, and then came to a very scientifically matched system parameters.
In the case of insufficient supply of domestic compressors, China still needs an appropriate amount of imports every year. The main trading countries are Germany, the United States, Italy, Japan, Denmark, Brazil, and South Korea. Equipment transformation, the quality and output of domestic compressors have been greatly improved. The insiders pointed out that only the quality breakthroughs can be achieved in the core technology of the industry, and the heat pump products can be more efficient and energy-saving, and the market has become more extensive.
Five face machining center processing, eliminate residual stress, rigidity, make the machine more stable, higher accuracy. Three axis full screw drive, using advanced breakpoint memory function, can continue to process in case of broken knife, power failure or the next day.
|
Model
|
CX-2-600-200
|
CX-4-300-200
|
|
Working area
|
Column engraving:2×600×2000
|
Column engraving:4×300×2000
|
|
Maximum work rate
|
15m/min
|
|
Working power supply
|
AC380v/±10%,50HZ
|
|
Cooling method
|
Water-cooling
|
|
Repeat Accuracy
|
DSP/NC studio
|
|
Transportation
|
0.02mm
|
|
Control system
|
Screw
|
|
Order Code
|
G code ,U00,mmg,plt
|
|
Spindle power
|
5.5×2
|
4.5×4
|
|
Whole power
|
3550×2450×2650
|
3550×2450×2650
|
|
Machine size
|
13KW
|
20KW
|
|
Net weight
|
3
|
3
|
Column Engraving Machine
Column Engraving Machine,Stone Engraving Cnc Machine,Stone Engraving Cnc Router,Stone Cnc Router
JINAN HT MACHINERY CO.,LTD , http://www.jncncrouter.com