The car's paint is as fragile as the human skin. The car paint surface is stained with many things and it can be scratched. If our skin is not maintained or care, it will cause acne, and the car paint will not be maintained. There will be a series of problems such as cracks, so we need some knowledge of car maintenance.
1. Prevent metal rust Corrosion is mainly caused by the joint action of moisture, oxygen, and corrosive substances in the air. Therefore, for long-term parked cars, the metal surface should be kept clean. Parking garages should always be ventilated to keep the relative humidity below 70%.
Remove dust, dirt, and moisture from the car in a timely manner. The rust-prone parts and the surfaces of the parts should be coated with oil, grease or wrap. The pores in each assembly should be sealed to prevent air, moisture and dust from entering the interior.
2. Prevent deterioration of rubber products Rubber products on automobiles, such as tires, transmission belts, and dust covers, often undergo aging, swelling, or deformation, resulting in deteriorated performance and shorter service life.
The aging of rubber products is mainly due to the fact that rubber is an unsaturated polymer hydrocarbon that easily absorbs oxygen from the air and oxidizes. At the same time, vulcanized rubber has a certain degree of air permeability, and oxygen easily enters the interior to cause oxidation. Especially direct sunlight can promote rapid aging of rubber. After rubber products are contaminated with gasoline and engine oil, they will cause volume expansion, loosening gums, and reduced elasticity.
In order to prevent the aging of rubber products, direct sunlight and mineral oil contact should be avoided.
XMC HAC5000-10 1'' central pneumatic Air Compressor parts air filter regulator lubricator With Quick Fitting
Specification
|
Order No.
|
|
|
Ensured Pressure Resistance
|
|
|
Highest Working Pressure
|
|
|
Ambient and Fluid Temperature
|
|
|
*Filter Precision
|
|
|
Recommended Oil Use
|
|
|
Container Material
|
|
|
Protective Cover
|
|
|
Pressure Regulating Range
|
|
|
Valve Type
|
|
Our advantages
1. OEM available.Experienced pneumatic product suppler.
2. Professional design team and sales department for your service.100% test for air pressure and inspection for product appearance before shipment.
3. Alibaba supplier , factory recognized by CE/FSC/ISO9001 and so on.
4. 7/24 Service for you , all the question will be dealt within 24 hours.
5. Location advantage: Nearby Ningbo port, the second largest port in China, convenient transportation and low cost, and close to Shanghai, convenient for customers to visit our factory.
Air Compressor Fitting
Air Compressor Fitting,Pneumatic Air Compressor Fitting,Air Compressors Steel Pipe Fitting,Plastic Air Compressor Fitting
Hangzhou Hanray Industry Co., Ltd , http://www.aircompressor.pl