How to select the internal and external method of ammeter

I believe that everyone will use the ammeter when the question will be how to choose the internal method? The following is a summary of several methods for your reference:

A: error method ammeter internal connection R = Rx + RA, the cause of the error is the ammeter voltage, its measurement results are large, the relative error is RA/Rx; current meter external method R measurement = RxRV / (Rx + RV), error The reason is that the voltmeter is shunted and its measurement result is too small. The relative error is Rx/RV.

This method is suitable for roughly knowing the resistance value to be measured and the internal resistance of voltmeter and ammeter.

Two: The heuristic method The ammeter is tested once according to the in-line method and the external method. The counts of the voltmeter and the ammeter are changed. The relative sizes of the two tables are compared: ΔI/I and ΔU/U, where I and U are Take a set of measurements. Analyze one of the bigger reasons and avoid it. For example, ΔI/I>ΔU/U indicates that the two connections have a greater influence on the current. The reason is that the voltmeter has a well-defined partial pressure and should be avoided in the experiment. Therefore, the ammeter connection method should be used.

This method is suitable for not knowing the resistance value to be measured and the internal resistance of the voltmeter and the ammeter.

Three: the precise method of ammeter internal R method = Rx + RA, ammeter external method R = RxRV / (Rx + RV), if in the experiment know the voltmeter or ammeter accurate internal resistance value, the internal resistance of the meter can be Substituting the measurement results into a more accurate resistance of the resistance to be measured. At this time, it is not limited by the size of the error in the method, as long as you choose the connection method that can measure the exact value of the resistor.

This method is suitable for knowing the resistance value to be measured and the accurate value of the voltmeter and the current meter internal resistance.

Side Loader has Diesel Side Loader and electric side loader. The capacity ranges from 2 ton, 3 ton, 4 ton, 5 ton, 6 ton, 7 ton, 8 ton, 10 ton.

Side loaders difference with standard forklifts, they can drive up alongside the rack or the truck and easily unload and load from the side.

Side loaders are designed to work in narrower aisles and indoors. It can handling Long loads such as timber, steel or pipes, they are more easily handled because the load is facing in the direction being travelled, reducing the overall width of the equipment and load.

A platform allows the load to be more stabile, ensuring safer movement.

Since the load is carried on the side, the operator has clear visibility in front and behind.

Side loaders are not as standard forklifts (although multidirectional side loaders offer advances in this area)

Shantui Brand side Forklift Truck is a new type of carring scraper. It differs from the counter- balanced one mainly in that the forks are mounted on the side of the body.Besides lifting and tilting, the forks can also traverse to the right side of the truck frame, and retract back alongside the well in the middle section of the truck, long cargoes can be loaded by the forkson/from the truck deck, as well as transported in limites spaces. As the long cargoes are piled lengthwise along, the truck's platform, the width of the passageway required by the forklifter can be redued remarkably. Thereby, the side forklift truck is particularly suitable for handling timber, section steels, line poles, cement tubes, plastic pipes and other kind of bulky, over length cargoes. It found wide applications in the forestry department, railway stations, oilfields, harbours, warehoses, factories, construction sites, etc.

Shantui products including Diesel Forklift , Electric Forklift, heavy duty forklift, Gasoline Forklift, container forklift, side loader, Pallet Truck , Construction Machinery including shantui bulldozer, Wheel Loader , crawler excavator, road roller, generator set, motor grader, truck crane, construction machinery parts, Shantui Parts , Cummins engine parts, komatsu parts, and other machinery parts.

Side Loader

Side Loader,Skid Steer Loader,Mini Loader,Backhoe Loader

SHANDONG VOLIN HEAVY MACHINERY CO.,LTD. , http://www.shantuimachinery.com